|
Gas Club Car Gas DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
10-01-2011, 08:53 PM | #1 |
Gone Wild
Join Date: Dec 2009
Location: Aiken, SC
Posts: 13,188
|
05 Gas CC DS Throttle linkage questions
OK boys and girls, I screwed up. I was trying to make this puppy go faster than 14mph by adjusting the throttle tie rod and managed to break off one of the nipples next to the electric box. So I could get it working again, I made one out of a bolt that I ground a little ball on the end. Ain't perfect but it works. I also figured out that part of throttle pedal pivot pin is worn and I am losing some travel there.
So I guess my questions are, are these pieces replaceable or do I need to buy entire assemblies ?? Thanks in advance. |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
10-01-2011, 09:12 PM | #2 |
What the ....?
Join Date: Jan 2007
Location: N.E. Wisconsin
Posts: 14,933
|
Re: 05 Gas CC DS Throttle linkage questions
Ball Stud 1/4-28 x .0560 ~ Part# 1010954
Ball Joint ~ Part# 1011734 |
10-01-2011, 09:45 PM | #3 | |
Gone Wild
Join Date: Dec 2009
Location: Aiken, SC
Posts: 13,188
|
Re: 05 Gas CC DS Throttle linkage questions
Quote:
Did a little more searching and now realize I just need to pull the entire gas ped assm out and see what else I need. Yes, I will take pics.. This all started cuz it won't go fast enough Thing that bugs me is it is hitting the rev limiter but she only runs bout 14. Rear clutch isn't moving as much as I think it should but belt is shot so I will replace that first and try again. |
|
10-01-2011, 09:50 PM | #4 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: 05 Gas CC DS Throttle linkage questions
Does that cart have a ground driven limiter in the differential also?
|
10-01-2011, 10:00 PM | #5 |
What the ....?
Join Date: Jan 2007
Location: N.E. Wisconsin
Posts: 14,933
|
Re: 05 Gas CC DS Throttle linkage questions
If your talking about a "ground speed limiting governor", yep! Club Car gassers do!
|
10-01-2011, 10:02 PM | #6 |
Gone Wild
Join Date: Dec 2009
Location: Aiken, SC
Posts: 13,188
|
Re: 05 Gas CC DS Throttle linkage questions
It has the mech gov assm up top but where would I look for what you are talking about ? If I put it in neutral I can hit the rev limit at about 3/4 pedal as in the motor cuts out.
|
10-01-2011, 10:20 PM | #7 |
What the ....?
Join Date: Jan 2007
Location: N.E. Wisconsin
Posts: 14,933
|
Re: 05 Gas CC DS Throttle linkage questions
I'm guessing it didn't do this before you adjusted the linkage?
|
10-01-2011, 10:25 PM | #8 |
Gone Wild
Join Date: Dec 2009
Location: Aiken, SC
Posts: 13,188
|
Re: 05 Gas CC DS Throttle linkage questions
Well.... The first thing I had tried was the zip tie trick on the gov spring and it would cut out some then but I was thinking it was the mech gov causing this. In hindsight, it may have been the rev limit kicking in... Belt is next and then may go back to square one.
|
10-02-2011, 06:47 PM | #9 |
Gone Wild
Join Date: Dec 2009
Location: Aiken, SC
Posts: 13,188
|
Re: 05 Gas CC DS Throttle linkage questions
OK, got the new belt on and still a zippy 14mph. I have the gov set where it tops out just barely below the rev limit.Running 205/50-10 tires so that may have something to do with it and cant really tell if the rear clutch is expanding all the way. Kinda hard to tell at 2500 rpm.
Is this speed all I should expect ? |
10-02-2011, 07:05 PM | #10 | |
Gone Wild
Join Date: Aug 2009
Location: Eldon Missouri
Posts: 977
|
Re: 05 Gas CC DS Throttle linkage questions
Quote:
Chris. |
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Throttle linkage | Big Block Talk! | |||
Throttle Linkage | Big Block Talk! | |||
Throttle linkage | Gas EZGO | |||
throttle linkage | Gas Columbia ParCar | |||
Throttle Linkage | Big Block Talk! |