2006 EzGo Rebuild

[Cdebo1]

Originally Posted by Cdebo1

It's all rattle can. Allot of prep on the body I sanded it all with 300 then 600. Then high build primer and another 600 gritt. Then another primer coat and a 600 wet sand. Honestly I have given up can't get out the old waves from the horrible pre paint job but wife said looks good so. Good to Go!! Here is body done and installed. Used krylon 2x prime and paint as final coat.

Sorry for the upside down pic.

[Sir Nuke]

Originally Posted by Cdebo1

Sorry for the upside down pic.

wow.....glad you told us......for a second I thought I fell down and was on my head!

[tteckster]

Looks good from here!

[Cdebo1]

Thanks guys. This is my first cart and as everything else I kind of jumped in whole hearted. Just finished the front roof support and windshield, painting topside of roof and will get into painting bottom tomorrow hopefully. Hoping to have cart reassembled by week end. Then finish all wiring and connections by Sunday for a mothers day cruise.


Sent from my iPad using Tapatalk

[yurtle]

Originally Posted by Cdebo1

Sorry for the upside down pic.

FWIW,
Many smart phones assume you want it that way. A phone camera can be upside up or upside don in both portrait and landscape. We had problems with folks taking videos that way at work. When you review on the camera, it looks right, but once it's transferred to a PC, it outsmarts you. There's a LOT of data recorded, including camera, GPS location, etc.

[Cdebo1]

Originally Posted by yurtle

FWIW,
Many smart phones assume you want it that way. A phone camera can be upside up or upside don in both portrait and landscape. We had problems with folks taking videos that way at work. When you review on the camera, it looks right, but once it's transferred to a PC, it outsmarts you. There's a LOT of data recorded, including camera, GPS location, etc.

Yeah I normally transfer to my computer then rotate and what not but I just grabbed it from my phone. Just over zealous to share. Got windshield on last night and hopping to get roof done and installed but need to fab some seat brackets. Thinking that's gone take at least 2 12 packs to get right.

[Cdebo1]

Ok so got it all together just some minor wiring and 12v hookups and done. Question.... I have other cups but I primarily use Trevis cups and they don't fit yet no matter what I use in it they don't seem to fit, unless it's a can it, wont fit in the cup holders can anybody direct me to a cup that fits the cup holder???? Seems like a trivial question but I have an anal personality when it comes to stupid details.

[Cdebo1]

Almost done...Here are some put together photos. Just have to do the seats and we gona call that done.