04-02-2023, 10:15 AM | #1 |
Not Yet Wild
Join Date: Apr 2022
Posts: 2
|
Programming Changes Not Saving - RESOLVED
Hi all! The amount of knowledge here is amazing.
I have a 2023 i60L and have the new programming software and the cable, all connects fine, etc. My issue is I can only get ONE of the updated settings to save, that was 03 02 01 (Vehicle FWD Speed). I was able to adjust that to 51.5 just fine, but when I adjust say the reverse speed, and upload it, the value SEEMS to change and save, but when I cycle the key and go back into the tuning, it shows the value of 15 that changed, then within a few seconds it changes back to the default value of 8. This is driving me nuts. Same thing happens when I try to adjust things like FWD Acc Full HS and also the throttle mapping. I've tried super user and engineer mode, same result. Any help would be appreciated. UPDATE: DWD to save changes to the controller, not UPD. Who would have thought that? Last edited by Yachtsman1304; 04-02-2023 at 10:45 AM.. Reason: I figured it out |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Saving on Energy Costs | Garage and Workshop | |||
Saving a pair of 875's | Electric EZGO | |||
Saving a 94 Medalist | Electric EZGO | |||
saving $ on parts | Gas Harley Davidson |