2010 g2010

[Mjonj]

I have a 2010 Yamaha G29 the cart ran the night before but won’t run now. The solenoid clicks on but the cart won’t move. I have load tested every battery they are fine. Put my meter everywhere I can think of everything is getting the appropriate power. One thing I ear is a humming noise when I press the pedal.

Any advice is greatly appreciated. New to electric golf carts. Always had a gas

[Volt_Ampere]

If it's the original stock motor, there is a very good chance that it needs brushes. Other possible failures are the controller or the solenoid itself. Solenoid can click and not make contact if it's worn out. I got my 2009 dirt cheap with a dead motor - that only needed brushes to make it run. I have since replaced the motor and controller - and put in Lithium batteries.

[Mjonj]

Originally Posted by Volt_Ampere

If it's the original stock motor, there is a very good chance that it needs brushes. Other possible failures are the controller or the solenoid itself. Solenoid can click and not make contact if it's worn out. I got my 2009 dirt cheap with a dead motor - that only needed brushes to make it run. I have since replaced the motor and controller - and put in Lithium batteries.

I am thinking brushes. I picked it up super cheap “running”. I just wanted to trouble shoot everything before I pulled the motor. Thank youfor the input.