|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
02-26-2017, 08:57 AM | #1 |
Not Yet Wild
Join Date: Feb 2017
Location: Savannah, GA
Posts: 12
|
Removing body 92 CC DS for paint
Anyone have any tips or advice for doing this? I have someone to paint it but I need to get it apart first. I know there's only a few bolts holding it together just curious if there's anything I should look out for, before diving in!
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
02-26-2017, 09:54 AM | #2 |
Gone Wild
Join Date: Jan 2016
Location: Central Florida
Posts: 296
|
Re: Removing body 92 CC DS for paint
Take your time. It's a little more than a few bolts. Disconnect main negative terminal as you will be working around switches.
|
02-26-2017, 10:11 AM | #3 |
Gone Wild
Join Date: Jul 2008
Location: mass
Posts: 654
|
Re: Removing body 92 CC DS for paint
be carefull removing the screws that hold down the molding piece that holds the cowl in place.they are short and easy to loose....been there,if you have a buffing wheel good time to do that piece,looks good all polished
|
02-26-2017, 11:03 AM | #4 |
Gone Insane
Join Date: Oct 2016
Location: Richmond, VA
Posts: 14,214
|
Re: Removing body 92 CC DS for paint
I would take the batteries all the way out. You have to remove all the switches and input at the front of the rear body, and it also makes it MUCH easier to remove the seat bolts.
|
02-26-2017, 07:36 PM | #5 |
Not Yet Wild
Join Date: Dec 2016
Posts: 17
|
Re: Removing body 92 CC DS for paint
Take plenty of pictures and mark all your wires too!!
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Removing body for paint | Electric EZGO | |||
Removing body skins for paint ? | Gas Yamaha | |||
Removing Old Paint | Body and Paint | |||
Removing body of Precedent for paint | Electric Club Car |