|
|
|||||||
| Electric Club Car Electric DS, and Precedent golf cars |
  |
|
|
Thread Tools | Display Modes |
09-24-2020, 05:36 PM
|
#11 |
|
Not Yet Wild
Join Date: Aug 2020
Posts: 9
|
Re: Bad solenoid or controller?
I was able to have my motor rebuilt and just reinstalled it. Started off good but heard slight grinding sound so I stopped looked and the cart by the motor to ensure nothing was stuck or caught underneath and all looked good. Drove at a medium speed for another few minutes and then caught a slight smell of burning plastic under the seat. Nothing felt hot but I am wondering if the controller might be faulty now causing the solenoid resistor to get hot. Any thoughts? Am I thinking correctly? Thank you
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
09-24-2020, 05:51 PM
|
#12 |
|
Not Yet Wild
Join Date: Aug 2020
Posts: 9
|
Re: Bad solenoid or controller?
I was able to have my motor rebuilt and just reinstalled it. Started off good but heard slight grinding sound so I stopped looked and the cart by the motor to ensure nothing was stuck or caught underneath and all looked good. Drove at a medium speed for another few minutes and then caught a slight smell of burning plastic under the seat. Nothing felt hot but I am wondering if the controller might be faulty now causing the solenoid resistor to get hot. Any thoughts? Am I thinking correctly? Thank you
|
|
|
|
|
09-24-2020, 06:10 PM
|
#13 |
|
Not Yet Wild
Join Date: Aug 2020
Posts: 9
|
Re: Bad solenoid or controller?
I was able to have my motor rebuilt and just reinstalled it. Started off good but heard slight grinding sound so I stopped looked and the cart by the motor to ensure nothing was stuck or caught underneath and all looked good. Drove at a medium speed for another few minutes and then caught a slight smell of burning plastic under the seat. Nothing felt hot but I am wondering if the controller might be faulty now causing the solenoid resistor to get hot. Any thoughts? Am I thinking correctly? Thank you
|
|
|
|
|
| Tags |
| controller, solenoid |
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Solenoid or Controller? | Electric EZGO | |||
| New controller, New solenoid = No Go | Electric EZGO | |||
| Which solenoid to go with controller? | Electric EZGO | |||
| ez go dcs does nothing solenoid or controller? | Electric EZGO | |||
| Solenoid or Controller? | Electric EZGO | |||
Linear Mode
