94 ez-go ookay this ain't right

Andy4639 · 12-14-2011, 10:07 PM

Here is how the other side should look. Notice #1 terminal has nothing attached. This is where the wiper should be when off. #2 has the wiper and the #1 coil hooked to it.

Here it is with correct lables.

scottyb · 12-14-2011, 10:09 PM

Sounds like you fixed it yourself

Good luck!

dwon5 · 12-14-2011, 10:19 PM

well maybe not i now have no wires going fron the soleniod to the back side of the wiper switch

dwon5 · 12-15-2011, 09:48 AM

okay i found the problem diconected the feed from the micro switch and still had full power to the motor with the key off then some thing did not look right - the soleniod was a ford 12 volt type replaced with the proper 36 volt one and problem is now gone thanks for all the help

scottyb · 12-15-2011, 11:00 AM

There is a 100% failure rate in automotive solenoids placed in electric golf carts ... they are designed to make a momentary connection & Golf Cart (GC) solenoids are designed for a continuous connection = big difference in duty.

Andy4639 · 12-15-2011, 04:25 PM

Quote:

Originally Posted by dwon5

okay i found the problem diconected the feed from the micro switch and still had full power to the motor with the key off then some thing did not look right - the soleniod was a ford 12 volt type replaced with the proper 36 volt one and problem is now gone thanks for all the help

Yepper's that will do it everytime.

12-14-2011, 10:07 PM	#11
Andy4639 48/400/Alltrax HS motor Join Date: Jan 2007 Location: Liberty SC, Garden City SC Posts: 6,190	Re: 94 ez-go ookay this ain't right Here is how the other side should look. Notice #1 terminal has nothing attached. This is where the wiper should be when off. #2 has the wiper and the #1 coil hooked to it. Here it is with correct lables.

12-14-2011, 10:09 PM	#12
scottyb Happy Carting Join Date: Dec 2007 Location: Southern California Posts: 73,410	Re: 94 ez-go ookay this ain't right Sounds like you fixed it yourself Good luck!

12-14-2011, 10:19 PM	#13
dwon5 Getting Wild Join Date: Apr 2011 Location: toledo,ohio Posts: 97	Re: 94 ez-go ookay this ain't right well maybe not i now have no wires going fron the soleniod to the back side of the wiper switch

12-15-2011, 09:48 AM	#14
dwon5 Getting Wild Join Date: Apr 2011 Location: toledo,ohio Posts: 97	Re: 94 ez-go ookay this ain't right okay i found the problem diconected the feed from the micro switch and still had full power to the motor with the key off then some thing did not look right - the soleniod was a ford 12 volt type replaced with the proper 36 volt one and problem is now gone thanks for all the help

12-15-2011, 11:00 AM	#15
scottyb Happy Carting Join Date: Dec 2007 Location: Southern California Posts: 73,410	Re: 94 ez-go ookay this ain't right There is a 100% failure rate in automotive solenoids placed in electric golf carts ... they are designed to make a momentary connection & Golf Cart (GC) solenoids are designed for a continuous connection = big difference in duty.

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum