What is this?

[BUBBASCART]

What is this little square whit thing that the two wires are going to from the solinoid? its wire tied to the frame to the left of solinoid? also im missing the yellow wire going to the microswitch and the white wire goin to the reverse buzzer.

[jjance]

A resistor. Although it is not OEM.

[BUBBASCART]

i am missing a white wire going to the reverse buzzer and yellow wire going to the micro switch (limit switch) and the blue wire that goes from the micro switch to the ignition switch. would this have anything to do with those wires missing?

[jjance]

Why would you think this has anything to do with missing wires?

[BUBBASCART]

i havent seen one on any other cart or on the wire diagram. the white wire that is missing from the solenoid that goes to the reverse buzzer and the yellow wire that goes to the microswitch are not there and i didnt know if this was some type of bypass or not. its my first electric golf cart and i was just asking a question. im not a dumbass, i just wasnt sure what it was and what it did.

[BUBBASCART]

i guess the wire from the ignition switch is bypassing the limit switch. should i replace the limit switch and run a wire from that to the ignition switch and then to the solenoid like it came from the factory? what does that limit switch do? do i need that resistor or can i get rid of that?

thanks

[Stevegrmich]

. . . serial # of cart?

[TahoeDawgZ71]

It's called a "Snubber" OEM Part number 102047201. Not sure of it's purpose exactly. I've been told it's designed to dissipate heat if the solenoid sticks with the park brake locked. It was only found on 36 Volt V-Glide Resistor cars.