|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
06-05-2014, 11:11 PM | #1 |
Not Yet Wild
Join Date: May 2014
Posts: 4
|
98 Club Car Resistor Board
How hot should the resistor board get on a 36 volt cart.
I just had to rewire the cart from the key switch to V-Control to solenoid when I started the test ride the board seems to be getting hotter than normal. Any help would be greatly appreciated. |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
06-05-2014, 11:37 PM | #2 |
Guest
Posts: n/a
|
Re: 98 Club Car Resistor Board
they get hot ..no touchy hot .. you should have a heat shield over it
remember they like it wide open ... slower speeds use more resistors |
06-06-2014, 12:18 AM | #3 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,358
|
Re: 98 Club Car Resistor Board
They get red hot under slow operation...
|
06-06-2014, 04:27 PM | #4 |
Not Yet Wild
Join Date: May 2014
Posts: 4
|
Re: 98 Club Car Resistor Board
thanks for the replies.
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Resistor wiper contact board | Electric EZGO | |||
Changed resistor board, cart jumpy | Electric EZGO | |||
5TH speed resistor has a burned mark on resistor board and melted the wire | Electric EZGO | |||
Resistor board assembly problems | Electric EZGO | |||
resistor board material | Electric EZGO |