|
Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
|
04-21-2022, 12:11 AM | #1 |
Not Yet Wild
Join Date: May 2019
Posts: 6
|
upgrade for a robins 244cc
What are my options to upgrade an older EZ GO with a robins 244cc engine, the model number, at least what I can read on the sticker is EC25-something. I would like to get a newer motor with a little more power. not sure if there is any options, as I am new to the golf cart world, any ways any help would be much appreciated.
|
04-21-2022, 07:33 AM | #2 |
Test before replacing
Join Date: Aug 2013
Location: Ohio side of the Pennsylvania border.
Posts: 3,496
|
Re: upgrade for a robins 244cc
There were two different 2 strokes. The 2pg has the clutches going side to side. The 3pg has the clutches going front to back. Both of them ran the engine backwards to make the cart go in reverse. They did not have the reversible rear end like the 4 strokes do.
If you change the engine, you will lose reverse. If your governor is still hooked up, you can remove that and go from 12 mph to 18 mph with no mods on stock 18 inch tires. |
04-30-2022, 11:33 PM | #3 |
Gone Wild
Join Date: Mar 2022
Location: Ohio
Posts: 456
|
Re: upgrade for a robins 244cc
take off the air cleaner and the governor
|
05-02-2022, 10:14 AM | #4 |
Nincompoop Club Member
Join Date: Jun 2016
Location: Idaho
Posts: 1,178
|
Re: upgrade for a robins 244cc
I wouldn't remove the air filter but I would remove the governor, it'll make a big difference
|
05-02-2022, 10:19 AM | #5 |
Nincompoop village idiot
Join Date: Apr 2018
Location: Michigan
Posts: 9,690
|
Re: upgrade for a robins 244cc
|
|
|
Similar Threads | ||||
Thread | Forum | |||
EZ GO 244cc robins engine timing | Gas EZGO | |||
new in box top end kit for a 80 to 88 2 pg robins 244cc | Golf Carts and Parts | |||
244cc Robins | Gas EZGO | |||
81 EzGO Robins 244cc Backfiring | Gas EZGO | |||
ezgo 1988 244cc robins | Gas EZGO |