lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Gas Yamaha
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles



Post New Thread  Reply
 
Thread Tools Display Modes
Old 08-12-2015, 08:07 PM   #21
Ironworker85
Not Yet Wild
 
Ironworker85's Avatar
Yamaha
 
Join Date: Apr 2014
Location: Sandystone NJ
Posts: 56
Default Re: G1 getting hot after Umaxx spring install?

Hey guys is there any different tacks for a G1 being that its a 2 stroker or are the 4 stroke tacks all the same?
Ironworker85 is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Old 08-12-2015, 08:10 PM   #22
1989Marathon
Gone Wild
 
Join Date: Oct 2010
Posts: 6,730
Default Re: G1 getting hot after Umaxx spring install?

You will need a tach that is designed to work on a 2-stroke motor. The Equus 8068 will do that.
1989Marathon is offline   Reply With Quote
Old 08-12-2015, 08:16 PM   #23
Ironworker85
Not Yet Wild
 
Ironworker85's Avatar
Yamaha
 
Join Date: Apr 2014
Location: Sandystone NJ
Posts: 56
Default Re: G1 getting hot after Umaxx spring install?

Thanks bud i found a few digitals buddy of mine said are good for 2 strokers. Wat is a safe rpm for a g1 with a umaxx to be running?
Ironworker85 is offline   Reply With Quote
Old 08-12-2015, 08:18 PM   #24
1989Marathon
Gone Wild
 
Join Date: Oct 2010
Posts: 6,730
Default Re: G1 getting hot after Umaxx spring install?

What do you mean by "safe"?
1989Marathon is offline   Reply With Quote
Old 08-12-2015, 08:29 PM   #25
Ironworker85
Not Yet Wild
 
Ironworker85's Avatar
Yamaha
 
Join Date: Apr 2014
Location: Sandystone NJ
Posts: 56
Default Re: G1 getting hot after Umaxx spring install?

To keep it from runnin hot. Like wide open runnin down road wat wat is safe to run at for a little while with out doin any damage.
Ironworker85 is offline   Reply With Quote
Old 08-12-2015, 08:44 PM   #26
1989Marathon
Gone Wild
 
Join Date: Oct 2010
Posts: 6,730
Default Re: G1 getting hot after Umaxx spring install?

It is pretty hard to kill a G1 motor, unless you let is go lean, or let it suck dirt in. Here is a video of my old G1 motor, modified to run up around 9000rpms.
Oh, BTW, my name isn't Bud, it's Don.

1989Marathon is offline   Reply With Quote
Old 08-12-2015, 10:38 PM   #27
dbmachine
Gone Wild
 
dbmachine's Avatar
 
Join Date: Oct 2012
Posts: 1,733
Default Re: G1 getting hot after Umaxx spring install?

Can you put the original spring back in and see if it runs hot?
dbmachine is offline   Reply With Quote
Old 08-13-2015, 08:25 AM   #28
Ironworker85
Not Yet Wild
 
Ironworker85's Avatar
Yamaha
 
Join Date: Apr 2014
Location: Sandystone NJ
Posts: 56
Default Re: G1 getting hot after Umaxx spring install?

I can but i had original spring in for ever and it never seem to get that hot. So my only way to know if im runnin to lean is to check and c if plug is dry?
Ironworker85 is offline   Reply With Quote
Old 08-13-2015, 08:54 AM   #29
dbmachine
Gone Wild
 
dbmachine's Avatar
 
Join Date: Oct 2012
Posts: 1,733
Default Re: G1 getting hot after Umaxx spring install?

Hard to say. Most sure fire way to know and have piece of mind is to put the original spring in for a few days and fun it.
dbmachine is offline   Reply With Quote
Old 08-13-2015, 08:33 PM   #30
raydhd
VC 460 CLONE GONE WILD
 
raydhd's Avatar
Yamaha
 
Join Date: Oct 2014
Location: Ray BY The Bay NJ
Posts: 10,594
Default Re: G1 getting hot after Umaxx spring install?

I would certainly look at the plug before doing anything else to get some idea what is going on.It only takes a couple of minutes.The cheap digital works fine on two strokes there is a setting for that.Only downside is the lag,but I don't think that is much of an issue here.
raydhd is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Gas Yamaha


Thread Tools
Display Modes


Similar Threads
Thread Forum
Marathon leaf spring install help Gas EZGO
Got the Umaxx...build thread. Gas Yamaha
g16 power spring install help Gas golf carts
Rolling Cart after HD Spring install??? Gas Yamaha
speed spring install, need help Gas Yamaha


All times are GMT -5. The time now is 09:34 PM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.