![]() |
![]() |
#1 |
Not Yet Wild
![]() Join Date: Nov 2011
Location: Sanderson, FL
Posts: 5
|
![]() Thanks in advance for any help. I just re-ringed this FE290 engine, after test running I discovered that I'm not getting any oil to the top end. I know the top end is lubricated through oil splash and crank case pressure. I have crankcase pressure but just no oil with it. I have rebuilt several of these engine but have never ran into this issue. Any help would be greatly appreciated.
|
![]() |
![]() |
![]() |
|
![]() __________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
![]() |
#2 |
Gone Wild
![]() Join Date: Oct 2009
Location: Lee County, Georgia
Posts: 521
|
![]() fe290 has an oil pump.
|
![]() |
![]() |
![]() |
#3 |
Not Yet Wild
![]() Join Date: Nov 2011
Location: Sanderson, FL
Posts: 5
|
![]() Yes it does and I have oil pressure to the bottom end. Just isn't getting oil to the top end.
|
![]() |
![]() |
![]() |
#4 |
Gone Wild
![]() Join Date: Dec 2007
Location: SE Indiana
Posts: 383
|
![]() did someone put a head gasket on wrong and blocked the ports?
|
![]() |
![]() |
![]() |
|
Thread Tools | |
Display Modes | |
|
![]() |
||||
Thread | Forum | |||
predator 420 and champion rockers | Clone Engine Swaps | |||
New Rimz and rockers showed up | Members Rides | |||
rockers | Golf Carts and Parts | |||
Yamaha rockers | Gas Yamaha | |||
Diamond plate rockers | Lifted Golf Carts |