|
Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
03-05-2013, 11:22 PM | #1 |
Not Yet Wild
Join Date: Jan 2012
Posts: 8
|
Gas Workhorse: Starting difficulties.
When pressing the pedal absolutely nothing at all. Lights work. Dump bed works. Voltage at ignition. Battery tested on Load tester is good. Voltage at solenoid tests good when both probes on multimeter are put on the two big posts. When I Jump the solenoid by placing a wire (screwdriver) across the two posts it fires up. What do I need to check next. I also checked the microswitch under the mat on the floorboard in the little black box. I am very puzzled on this one. Any advice at all would be greatly appreciated. Thanks Brediaj.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
03-05-2013, 11:28 PM | #2 |
Gone Wild
Join Date: Oct 2010
Posts: 6,730
|
Re: Gas Workhorse: Starting difficulties.
I think you just answerd your own question. If you jumped across the solenoid and it started, I'd say the solenoid is suspect. When you say "Voltage at solenoid tests good when both probes on multimeter are put on the two big posts", what did it measure. It should measure zero volts when trying to start the cart.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
2000 EZGO Workhorse trouble starting | Gas EZGO | |||
Starting the new buggy...starting from new this time. | Members Rides | |||
97 Workhorse Hard Starting | Gas EZGO | |||
Workhorse intermittent starting | Gas EZGO | |||
Workhorse Hard Starting without choke | Gas EZGO |