Blue seas panel bolted?

[EzgoTXT2002]

You should see what the big 3 send 7.5 amps through
(20 ga.) and what they required aftermarket
upfitters to use was minimum 16 ga. for 15 amp draw.

[Mooncarter]

Any Lowes or Home Depot should have the hardware you need.

[Doubles Shooter]

I used 1/4" SS bolts with fender washers through the ww. I used vinyl trim board for the base.

Sent from my VS501 using Tapatalk

[sigfla45]

Originally Posted by Doubles Shooter

I used 1/4" SS bolts with fender washers through the ww. I used vinyl trim board for the base.

Sent from my VS501 using Tapatalk

That’s nice. I keep having to push on the outer wheel well to install my fuses. Wife is away so tonight I am gonna change out my speaker wire. Cart originally had electrical wire in there. It works but I wanted to extend it anyway so when I install my subwoofer I can pull the harness out a bit further to work.

[sigfla45]

Originally Posted by Mooncarter

Any Lowes or Home Depot should have the hardware you need.

I found some washers when I found the 12 gauge wire. I through bolted it last night. It’s on there tight now. I do wish this well liner was more rigid though. Pushing fuses in makes me feel like I am gonna pop it out unless I also push from the outside