EZGO PDS Wiring

[clevelandpat]

Hey all. I have a 2004 EZGO PDS 36v cart with some wiring issues. My repair manual shows a diagram but it's a little unclear to me. I'm not sure where the A2 cable goes from the motor and also the red and black wires from the instrumention. If anyone out there could help me with the color coding I'd be thankful. Thanks.

[JohnnieB]

Originally Posted by clevelandpat

Hey all. I have a 2004 EZGO PDS 36v cart with some wiring issues. My repair manual shows a diagram but it's a little unclear to me.
1. I'm not sure where the A2 cable goes from the motor

2. and also the red and black wires from the instrumention.

3. If anyone out there could help me with the color coding I'd be thankful. Thanks.

1. The A2 cable from the motor goes to the Controller's B+ terminal, or the solenoid's controller side large terminal. B+ terminal on the controller is the best choice.

2. Don't know what you mean by "instrumention"

3. Don't trust the wire colors shown on EZGO schematics. They've changed wire colors over the years and someone may have used any color wire that was handy for a repair.