|
Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
06-29-2010, 09:48 PM | #1 |
Not Yet Wild
Join Date: Jun 2010
Location: Phoenix,AZ
Posts: 7
|
Need help deciding on how to lift my cart.
I have a 1987 EZGO gas that i have already fliped the front axle and made 5 inch spacers and have coil over shock in back but it isn't high enough. Any ideas on a way to lift it higher?
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
07-01-2010, 11:21 AM | #2 |
Gone to refill cooler...
Join Date: Nov 2009
Location: Sacramento, California
Posts: 1,445
|
Re: Need help deciding on how to lift my cart.
I built a lift bracket from steel plate and 2 inch square tubing with 1.5 inch round tube struts to tie it to the frame in the rear. You could do something similar to drop the mount points for your suspension setup. Here is a link to my build thread:
http://www.buggiesgonewild.com/membe...-g14-limo.html You will find detailed pictures of how I fabricated the lift bracket for the front in the thread. If you have any questions feel free to ask! Kelly |
|
|
Similar Threads | ||||
Thread | Forum | |||
how to lift an ezgo cart gas | Lifted Golf Carts | |||
can't find a lift kit for my cart | Gas EZGO | |||
Help deciding on a new driven clutch | Gas EZGO | |||
Help deciding on golf cart! | Gas EZGO | |||
Cart lunges after lift. what next? | Gas EZGO |