89 E-Z-GO 2 Cycle Marathon

gizzmolink · 06-30-2010, 10:38 AM

Hi, I have a 89 EZGO Marathon 2 Cycle cart. I have been using the cart to pull a single jet ski to and from the lake. Things were going great until I noticed a slight 'slipping' feeling coming from the rear......Any ideas what this could be?? I'm also looking for a way to get more low end torque from it...any suggestions would be nice. I'm guess form the 'slipping' feeling one of the clutches are becoming wore. What clutch upgrades should I do or can I do on this cart?

madoc1 · 06-30-2010, 11:01 AM

check to be sure your axle nuts are really tight. they can and do slip.

as for torque i think you can use a shorter belt. someone with more knowledge will have to chime in. jim

gizzmolink · 06-30-2010, 12:18 PM

Thanks for the reply. I will check it out.

AirJunky · 06-30-2010, 03:46 PM

Tom at CPP helped me go thru my clutches in my 92. I replaced the springs & ramps & the thing gets around great now.

gizzmolink · 06-30-2010, 04:03 PM

Thanks, How do i contact them?? Is there a website I can visit??

AirJunky · 06-30-2010, 05:41 PM

On the Site Sponsors link at the top of the screen: http://www.buggiesgonewild.com/site-sponsors.php

CPP or Cart Parts Plus is at: http://www.cartpartsplus.com/

gizzmolink · 06-30-2010, 06:50 PM

Thanks

06-30-2010, 10:38 AM	#1
gizzmolink Not Yet Wild Join Date: Jun 2010 Posts: 5	89 E-Z-GO 2 Cycle Marathon Hi, I have a 89 EZGO Marathon 2 Cycle cart. I have been using the cart to pull a single jet ski to and from the lake. Things were going great until I noticed a slight 'slipping' feeling coming from the rear......Any ideas what this could be?? I'm also looking for a way to get more low end torque from it...any suggestions would be nice. I'm guess form the 'slipping' feeling one of the clutches are becoming wore. What clutch upgrades should I do or can I do on this cart?
gizzmolink Not Yet Wild Join Date: Jun 2010 Posts: 5

06-30-2010, 11:01 AM	#2
madoc1 no clue Join Date: Sep 2009 Location: spicewood, texas Posts: 3,308	Re: 89 E-Z-GO 2 Cycle Marathon check to be sure your axle nuts are really tight. they can and do slip. as for torque i think you can use a shorter belt. someone with more knowledge will have to chime in. jim

06-30-2010, 12:18 PM	#3
gizzmolink Not Yet Wild Join Date: Jun 2010 Posts: 5	Re: 89 E-Z-GO 2 Cycle Marathon Thanks for the reply. I will check it out.
gizzmolink Not Yet Wild Join Date: Jun 2010 Posts: 5

06-30-2010, 03:46 PM	#4
AirJunky Gone Wild Join Date: Jul 2009 Location: Liberty Lake, WA. Posts: 1,762	Re: 89 E-Z-GO 2 Cycle Marathon Tom at CPP helped me go thru my clutches in my 92. I replaced the springs & ramps & the thing gets around great now.

06-30-2010, 04:03 PM	#5
gizzmolink Not Yet Wild Join Date: Jun 2010 Posts: 5	Re: 89 E-Z-GO 2 Cycle Marathon Thanks, How do i contact them?? Is there a website I can visit??
gizzmolink Not Yet Wild Join Date: Jun 2010 Posts: 5

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

06-30-2010, 05:41 PM	#6
AirJunky Gone Wild Join Date: Jul 2009 Location: Liberty Lake, WA. Posts: 1,762	Re: 89 E-Z-GO 2 Cycle Marathon On the Site Sponsors link at the top of the screen: http://www.buggiesgonewild.com/site-sponsors.php CPP or Cart Parts Plus is at: http://www.cartpartsplus.com/

06-30-2010, 06:50 PM	#7
gizzmolink Not Yet Wild Join Date: Jun 2010 Posts: 5	Re: 89 E-Z-GO 2 Cycle Marathon Thanks
gizzmolink Not Yet Wild Join Date: Jun 2010 Posts: 5

Similar Threads
Thread	Forum
93 marathon 4 cycle wont rev ?	Gas EZGO
93 marathon 4 cycle no spark ?	Gas EZGO
86 gas 2 cycle marathon	Gas EZGO
WTB 2 Cycle Engine for 90 Marathon	Golf Carts and Parts
1990 marathon 4 cycle	Gas EZGO