|
|
|||||||
| Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
  |
|
|
Thread Tools | Display Modes |
07-11-2014, 02:41 PM
|
#1 |
|
Gone Wild
Join Date: Jun 2014
Location: NC
Posts: 192
|
SOC Calibration
Is it possible to calibrate the stock RXV SOC meter? If so, how?
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
07-11-2014, 04:13 PM
|
#2 |
|
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: SOC Calibration
Nope...
|
|
|
|
|
07-11-2014, 05:17 PM
|
#3 |
|
Gone Wild
Join Date: Jun 2014
Location: NC
Posts: 192
|
Re: SOC Calibration
How about zeroing? Is there an adjustment on the back?
|
|
|
|
|
07-12-2014, 04:41 PM
|
#4 |
|
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: SOC Calibration
Nope. All done by the controller. And i have not found any settings in the software to modify its behavior either.
|
|
|
|
|
07-12-2014, 05:13 PM
|
#5 |
|
Gone Mad
 Join Date: Oct 2009
Location: Buford, GA
Posts: 8,988
|
Re: SOC Calibration
I had to change the scale on a panel mount ammeter (not buggy related). I opened it up, removed the scale, scanned it, modified it, printed it, then glued it over the old one. Replaced the cover and it looks as good as factory.
|
|
|
|
|
07-13-2014, 04:48 AM
|
#6 |
|
Gone Mad
Join Date: Oct 2009
Location: Buford, GA
Posts: 8,988
|
Re: SOC Calibration
I made the assumption that an RXV has an analog SOC gauge.
|
|
|
|
|
07-13-2014, 11:57 AM
|
#7 |
|
Gone Wild
Join Date: Jun 2014
Location: NC
Posts: 192
|
Re: SOC Calibration
That is correct, yurtle. It seems to over-range high when fully charged and lingers high for awhile under load...then drops to about half. Just not very linear. That may reflect how the batts discharge, though.
|
|
|
|
|
|
||||||
|
|
Linear Mode
