|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
10-16-2012, 09:22 PM | #1 |
Not Yet Wild
Join Date: Jun 2012
Location: Little Rock, AR
Posts: 63
|
My Yamaha G2 Build Thread
Hey y'all just got a 1988 Yamaha G2 for $725 and she's runs perfectly! I plan to make a beauty out of her and drive her around my neighborhood, it's great because I'm only 14! Just some quick questions about the cart! 1. The man that sold it to me said the governor is off, how do I check that it is off? 2. The cart will get going really fast and then slow (when fully pressing down on the accelerator) and get going real fast again. What might be causing this? Thanks for any help!
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
10-16-2012, 09:28 PM | #2 |
Not Yet Wild
Join Date: Jun 2012
Location: Little Rock, AR
Posts: 63
|
Re: My Yamaha G2 Build Thread
Here's some pics of the cart as I bought it.
|
10-16-2012, 09:32 PM | #3 |
Not Yet Wild
Join Date: Jun 2012
Location: Little Rock, AR
Posts: 63
|
Re: My Yamaha G2 Build Thread
I removed the top, because the front U was broken. I also ordered a fuel inlet cap or whatever, headlights, and a new starter/generator belt because mine shredded as I was driving.
|
10-17-2012, 05:57 AM | #4 |
Admin/Moderator
Join Date: Dec 2006
Location: Ohio
Posts: 18,055
|
Re: My Yamaha G2 Build Thread
Nice project cart! Keep the pics coming.
|
Ron
PLEASE VISIT Our Sponsors * BGW GEAR The Store The G2 Project * Swing Arm Drop & Repair * Geep1 Project |
|
10-17-2012, 06:50 AM | #5 |
Admin
Join Date: Dec 2006
Location: TN
Posts: 101,872
|
Re: My Yamaha G2 Build Thread
Nothing like a nice G2 to restore. Cart appears to be in good shape. I like the round tail lights. Keep us up to date on the project.
|
|
|
02-25-2013, 09:06 PM | #6 |
Not Yet Wild
Join Date: Jun 2012
Location: Little Rock, AR
Posts: 63
|
Re: My Yamaha G2 Build Thread
Finally got my lift kit in, and installed! However I haven't gotten any new tires or rims yet
|
02-26-2013, 05:07 AM | #7 |
Gone Wild
Join Date: Jun 2012
Location: Andover,ohio
Posts: 209
|
Re: My Yamaha G2 Build Thread
Nice cart,glad to see young people getting into restoring old carts.
|
02-26-2013, 07:50 AM | #8 |
Gone Wild
Join Date: Aug 2012
Location: Colona, Illinois
Posts: 473
|
Re: My Yamaha G2 Build Thread
Welcome and congrats on the cart. Keep the pics coming.
|
02-27-2013, 08:20 PM | #9 |
Not Yet Wild
Join Date: Jun 2012
Location: Little Rock, AR
Posts: 63
|
Re: My Yamaha G2 Build Thread
Well thanks guys! It is really fun for me to do, and its a good way to learn about small motors! Quick question: With the 6" lift i put on, do you think i could clear 23s? or are 22s the max?
|
02-27-2013, 08:28 PM | #10 |
I Refuse To Get Stuck!!!
Join Date: Jun 2010
Location: Hilton,NY
Posts: 5,427
|
Re: My Yamaha G2 Build Thread
Looks Good!!You may fit 23"s,it depends on the tire,they are all a little different sized.If you have access to any,try them,even if they are 22"s then you will get an idea of what will work.The biggest killer is the rear wheel-wells,since they are kinda small.Hope this helps.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
'09 Yamaha Drive Build Thread | Members Rides | |||
My Build Thread (many ???'s inside) | On Road Golf Carts! | |||
600cc Yamaha Kart Build Thread | Bike & ATV Engine Swaps | |||
My Official '97 CC DS Build Thread | Electric Club Car | |||
1996 CC build thread | Electric Club Car |