|
|
|||||||
| Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
|
Thread Tools | Display Modes |
11-16-2013, 10:00 AM
|
#1 |
|
Not Yet Wild
Join Date: Feb 2013
Posts: 5
|
Ezgo dcs solenoid clicks but wont disengage and wont move
i have a dcs that wont move. it has a new solenoid and controller. battery pack reads 36.9 v. i also have changed the ITS. all conections are tight but the forward reverse feels funny. could that be bad and that is why the solenoid wont release? is there a way to clean it? why do i jump past terminal five only if my solenoid clicks? because out of all the tests eveything is fine but terminal five but it says skip that test anyhow? what to do now?
 |
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| need help! dcs clicks but wont move | Electric EZGO | |||
| 1988 Marathon -solenoid clicks-wont move | Electric EZGO | |||
| 91 ezgo solenoid clicks, wont move | Electric EZGO | |||
| EZGO just clicks wont move | Electric EZGO | |||
| solenoid clicks/ wont move | Electric EZGO | |||
Threaded Mode