02-12-2017, 04:49 PM | #1 |
Not Yet Wild
Join Date: Aug 2015
Location: Alabama from New Jersey
Posts: 62
|
MPT 1200 start issue
I just got this cart a month or so ago,and it was not in running condition.I managed to get the cart started but it was in need of a rebuild job on the motor. I found a new motor and installed that and I still have a few start issues.
When I got the cart I needed to jump the solenoid in order to get the starter /gen to engage. I replaced the solenoid when I replaced the motor and now when I attach the battery cables, the oil light comes on and stays on even when the key is turned off. I still have to jump the solenoid in order to start the motor. When I jump the solenoid, the motor the motor will start with the foot pedal and will stop when I release the pedal. Any idea what could be wrong? This cart has the 13 hp Kawasaki single in it. |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
02-14-2017, 09:45 AM | #2 |
Not Yet Wild
Join Date: Aug 2015
Location: Alabama from New Jersey
Posts: 62
|
Re: MPT 1200 start issue
would anyone have a wiring diagram,or perhaps a troubleshooting guide for this mpt 1200 ?
I am going to sell this workhorse as soon a I get it done.I don't want to buy a service manual just to find a wiring issue.I am hoping someone here has as diagram. I Would appreciate the help. Reggie |
|
|
Similar Threads | ||||
Thread | Forum | |||
G1 start up issue | Gas Yamaha | |||
2001 ezgo workhorse 1200 won't start | Gas EZGO | |||
ez-go start issue | Electric EZGO | |||
01 Workhorse 1200 Charging Issue | Gas EZGO | |||
2000 WORKORSE 1200 NO FIRE no start | Gas EZGO |