|
02-16-2017, 07:17 PM
|
#1 |
|
Not Yet Wild
Join Date: Feb 2017
Posts: 56
|
Governor ?
I took ALL of the slack out, Cart runs better but still hesitates before climbing any decent hill I do have a 6 inch lift on it But never had a problem before
Should I put some slack back in it? |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
02-18-2017, 08:22 AM
|
#2 |
|
Gone Wild
Join Date: Feb 2008
Location: Brooklyn, Michigan "Home of M.I.S."
Posts: 3,667
|
Re: Governor ?
could it be a loose belt?
|
|
|
|
|
02-18-2017, 09:58 AM
|
#3 |
|
Gone Wild
Join Date: Jun 2015
Location: NW Iowa
Posts: 1,669
|
Re: Governor ?
Clean and inspect clutches
|
|
|
|
|
02-18-2017, 10:23 AM
|
#4 | |
|
Not Yet Wild
Join Date: Feb 2017
Posts: 56
|
Re: Governor ?
Quote:
the belt squeezes almost to the top of the clutch Belt is maybe a year old. |
|
|
|
|
|
02-18-2017, 12:36 PM
|
#5 |
|
Hammer Down !!!!
Join Date: Jun 2010
Location: Lake Geneva, WI
Posts: 2,681
|
Re: Governor ?
BOTH clutches need to be working together, while the drive clutch moves the belt to the top of the sheaves, the rear (driven) clutch should be opening to allow the belt to ride down to the bottom, are they both doing "their thing" ?
|
|
|
|
|
02-19-2017, 07:32 PM
|
#6 | |
|
Not Yet Wild
Join Date: Feb 2017
Posts: 56
|
Re: Governor ?
Quote:
Thanks |
|
|
|
|
 |
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| governor bypass or replace governor cable | Gas Yamaha | |||
| G16 Governor | Gas Yamaha | |||
| G9 Governor | Gas Yamaha | |||
| G1 governor | Gas Yamaha | |||
| governor help | Gas Yamaha | |||
Linear Mode
