|
|
|||||||
| Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV. |
  |
|
|
Thread Tools | Display Modes |
08-16-2017, 11:13 AM
|
#1 |
|
Not Yet Wild
Join Date: Aug 2017
Posts: 5
|
EZGO Gas pedal clicks but wont go
2010 EZGO RXV. When you press the gas pedal the solenoid clicks but cart won't go in fwd or reverse. Reverse sound still works when you switch to reverse. Checked solenoid to battery 12.5v. checked other large post with pedal pressed 12.5v. Checked large post to large post with no wires connected on ohms and get 0
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
08-16-2017, 01:00 PM
|
#2 | |
|
Gone Wild
Join Date: Feb 2008
Location: Brooklyn, Michigan "Home of M.I.S."
Posts: 3,667
|
Re: EZGO Gas pedal clicks but wont go
Quote:
|
|
|
|
|
|
08-16-2017, 01:38 PM
|
#3 | |
|
Not Yet Wild
Join Date: Aug 2017
Posts: 5
|
Re: EZGO Gas pedal clicks but wont go
Quote:
On testing the wire at starter generator... There is a wire that goes from solenoid to starter/generator. At starter/generator power is 12.5 with gas pedal pushed. There is another big wire that goes from one side of starter/generator with 12.5 when gas pedal is pushed. Is this where you was referencing doing the test at? |
|
|
|
|
|
08-16-2017, 01:45 PM
|
#4 |
|
Not Yet Wild
Join Date: Aug 2017
Posts: 5
|
Re: EZGO Gas pedal clicks but wont go
I did not test the voltage regulator
|
|
|
|
|
08-16-2017, 02:36 PM
|
#5 | |
|
Gone Wild
Join Date: Feb 2008
Location: Brooklyn, Michigan "Home of M.I.S."
Posts: 3,667
|
Re: EZGO Gas pedal clicks but wont go
Quote:
Yep the big wire, try turning the starter a little by hand then try starting again. |
|
|
|
|
|
08-16-2017, 05:14 PM
|
#6 |
|
Not Yet Wild
Join Date: Aug 2017
Posts: 5
|
Re: EZGO Gas pedal clicks but wont go
It is going to be the starter/generator. When you press gas and give the clutch a spin it starts working. Now the question is whether I should buy kit or replace unit. Thanks for your help.
|
|
|
|
|
08-16-2017, 05:28 PM
|
#7 |
|
Gone Wild
Join Date: Feb 2008
Location: Brooklyn, Michigan "Home of M.I.S."
Posts: 3,667
|
Re: EZGO Gas pedal clicks but wont go
Never had one apart but you can replace the brushes in them,
I have heard not so good stories about aftermarket ones. |
|
|
|
|
08-16-2017, 07:39 PM
|
#8 |
|
Not Yet Wild
Join Date: Jul 2017
Location: NY
Posts: 72
|
Re: EZGO Gas pedal clicks but wont go
Agree with StoveBolt. Check the brushes first, and if it needs more than that, send it out to be rebuilt. My local NAPA can process them for rebuidling, so you might have similar luck with a shop near you.
|
|
|
|
|
08-16-2017, 08:05 PM
|
#9 |
|
Not Yet Wild
Join Date: Aug 2017
Posts: 5
|
Re: EZGO Gas pedal clicks but wont go
Thanks BurntClutch and StoveBolt. Checked with mine and they charge 80. Kit alone costs 47so I’m just going to pay them.
|
|
|
|
|
08-16-2017, 08:37 PM
|
#10 |
|
Gone Wild
Join Date: Feb 2008
Location: Brooklyn, Michigan "Home of M.I.S."
Posts: 3,667
|
Re: EZGO Gas pedal clicks but wont go
 |
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| 36v EZGO just clicks when pedal is pushed | Electric EZGO | |||
| 1998 EZGO 'clicks' when pedal depressed | Electric EZGO | |||
| Ezgo dcs solenoid clicks but wont disengage and wont move | Electric EZGO | |||
| 91 ezgo clicks but wont go | Electric EZGO | |||
| 1982 ezgo only clicks when hit accel pedal? | Electric EZGO | |||
Linear Mode
