lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Gas Yamaha
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles



Post New Thread  Reply
 
Thread Tools Display Modes
Old 03-07-2020, 08:39 PM   #1
Frameman316
Not Yet Wild
 
Join Date: Jan 2020
Location: Tennessee
Posts: 3
Default How does the ignition coil mount in a 1992 G8?

Hi everybody i just purchased a g8 golf cart that wasn't running and wouldn't even turn over i figured the wiring out to get it turning over when the gas pedal is depressed however when i got to the ignition coil wires they didn't have any connectors and the coil was in the dash compartment im trying to see where the coil bolts too ive taken the cover off but have not located any mounting holes any help would be appreciated i will attach photos fo your review... please excuse the wiring once i get it firing i will go back and soilder and heat shrink them and loom them
Attached Images
File Type: jpg 15836308859917253966230791911818.jpg (230.1 KB, 0 views)
File Type: jpg 15836309920843134593317561367692.jpg (225.6 KB, 0 views)
File Type: jpg 15836313523536751190878121293695.jpg (213.6 KB, 0 views)
File Type: jpg 15836313752484641687262681434986.jpg (230.0 KB, 0 views)
Frameman316 is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Old 03-07-2020, 10:04 PM   #2
CP241
Nincompoop village idiot
 
CP241's Avatar
Club Car
 
Join Date: Apr 2018
Location: Michigan
Posts: 9,682
Default Re: How does the ignition coil mount in a 1992 G8?

It mounts on the cooling shroud on the front side of the motor, there should be 2 holes provisioned there for the coil.

However, it appears you're missing a lot of the cooking fan shrouds. You are going to want to replace them or that motor is gonna overheat and cause you all sorts of problems.
CP241 is offline   Reply With Quote
Old 03-08-2020, 10:55 AM   #3
Frameman316
Not Yet Wild
 
Join Date: Jan 2020
Location: Tennessee
Posts: 3
Default Re: How does the ignition coil mount in a 1992 G8?

I have the cooling shrouds. Could someone post exactly where the coil mounts, I'm not seeing any holes for mounting on the front of the engine.
Frameman316 is offline   Reply With Quote
Old 03-08-2020, 11:05 AM   #4
cgtech
Over This Interview Is...
 
cgtech's Avatar
Yamaha
 
Join Date: Jun 2012
Location: AZ
Posts: 17,449
Default Re: How does the ignition coil mount in a 1992 G8?

So, post a picture of the remaining shroud parts that arent yet installed. That's the part with the holes for coil mount.

There is a lot of the shroud that's missing in your pics.
cgtech is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Gas Yamaha




Similar Threads
Thread Forum
1992 Club Car Snubber Mount Extension for 6" Lift Gas Club Car
WTB 1992 Club Car DS Oil Filter Mount Golf Carts and Parts
1992 ignition coil Gas Club Car
Yamaha G9-Ignition Coil & Ignition Switch-Help Gas Yamaha
coil for 1992 ez go marathon Gas EZGO


All times are GMT -5. The time now is 11:55 PM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.