G1 secondary clutch rebuild

[nitro1]

Hey guys my secondary clutch in a G1 Yamaha went flying and need help on rebuilding it :( I used google to see if I can’t find a image on showing how it goes back together but getting me confused lol, one image shows 2 oil washers and one image shows I don’t need any, can anyone post the right image for me to work with TIA

[slonomo]

Did you read your other thread where I posted the link to my thread?

Originally Posted by slonomo

Here's my thread when I did mine years ago. Post #35 starts the clutch.
https://www.buggiesgonewild.com/show...t=58329&page=4

I'm trying to help you.

[slonomo]

Here you go, both from the sponsor's page. I recommend Plowman's performance clutch, that's the same clutch I use. The other will likely be a stock clutch.

Call Don Plowman and tell him what happened and what you need, he has it all.

Plowman's Carts
https://www.plowmanscarts.com/carts....1587503735&v=2

DIY Golf Cart is another sponsor
https://diygolfcart.com/yamaha-parts...iven-clutches/

Link to clutch diagram
http://www.adeptpowersports.com/oem-...-assembly.html

The installation instructions below are for G2 and newer, but the idea is the same. G1 just has a different helix because it turns in reverse direction so it has buttons and ramps on both sides.