|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
06-13-2020, 10:22 AM | #1 |
Not Yet Wild
Join Date: Apr 2020
Posts: 21
|
engine won't fire
I am working on a friends Yamaha G1 1986; rebuilt the motor found the oil pump was done kinda explains why it needed to be rebuilt. Using mix oil and gas, Trouble shoot and found the fuel pump gone replaced with electric.
See link below it kinda fires but not ccompletly? https://www.youtube.com/watch?v=8SJvej23qxI I needed to go full throttle and full choke to get it to kinka pop as shown in the video Any assistance would be appreciated |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
06-13-2020, 09:30 PM | #2 |
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: engine won't fire
So, you did replace both crank seals in the case when you rebuilt it, right?
Or did you "re-ring" it, as opposed to "rebuilt" it? What you are describing perfectly matches air leaks. |
06-14-2020, 06:39 AM | #3 |
Not Yet Wild
Join Date: Apr 2020
Posts: 21
|
Re: engine won't fire
yes replaced both it was complete kit both top and bottom all bearings crank everything.
I am wondering if its carb issue the carb is new just not sure |
06-14-2020, 07:00 AM | #4 |
Not Yet Wild
Join Date: Apr 2020
Posts: 21
|
Re: engine won't fire
I removed the air box it was cracked and replaced it with dirt bike style air filter. there is a box at the top of the Carb it seams to have a sensor of some kind not sure what it is doing. I tried taking the box off and plugging the hole but it still won't fire.
Where would I check for potential air leaks? The feed from the crank/bottom end for the old pump is open not sure if I should plug that? Also there is a line that connected to the oil pump plugged it on the carb and left it open to the pump............not sure how to connect |
06-14-2020, 09:21 AM | #5 |
Not Yet Wild
Join Date: May 2020
Posts: 50
|
Re: engine won't fire
Any chance its a timing issue from changing the seals?
|
06-14-2020, 10:30 AM | #6 |
Not Yet Wild
Join Date: Apr 2020
Posts: 21
|
Re: engine won't fire
not sure I didn't change anything marked everything I took apart and put it back the same way
How do I check or change the timing? |
06-14-2020, 11:18 AM | #7 |
Not Yet Wild
Join Date: Apr 2020
Posts: 21
|
Re: engine won't fire
Let’s recap
First of all thanks for replying I do appreciate your assistance.............Very new to the cart world I have a Carry-all that I just redid can fire some photos its a 4 stroked so it was easier for me. The older 2 strokes not allot of people seam to have advise or knowledge So I heard the new carbs are crap so I kept the original and cleaned it up...........How should I set the screws on the carb I think there looks to be 2 adjustable ones? |
06-14-2020, 11:19 AM | #8 |
Not Yet Wild
Join Date: Apr 2020
Posts: 21
|
Re: engine won't fire
Almost forgot the timing do you know how I check/set and set the timing on the G1 2-stoke?
|
06-14-2020, 11:36 AM | #9 |
Not Yet Wild
Join Date: May 2020
Posts: 50
|
Re: engine won't fire
To adjust, you move the coils one way or the other under the fan on the passenger side. I will try and find the link i was reading. But there should be a sight glass with 2 marks that have to line up on the fan side. Havent done it myself or even looked for the marks. But if your coil didnt go back in exact when you did the seal on that side your timing may be out.
|
06-14-2020, 11:38 AM | #10 |
Not Yet Wild
Join Date: May 2020
Posts: 50
|
Re: engine won't fire
Google yamaha g1 timing adjustment. there may be a good link on a page about other cart aholics.
|
Tags |
1986 yamaha g1 |
|
|
Similar Threads | ||||
Thread | Forum | |||
2001 EZ-GO TXT Engine Wont Fire. | Gas EZGO | |||
83 gas EZGO: engine turns over but won't fire | Gas EZGO | |||
Engine Wont fire | Gas EZGO | |||
Engine will not fire when pressing accelerator | Gas EZGO | |||
Engine wont fire | Gas EZGO |