16x1 nut

Tonyoldcart · 08-31-2020, 03:51 PM

Where do you buy them? Two dealers in my 1 1/2 hour drive range don’t have them, fastenal didn’t, auto parts didn’t. Any suggestions?

Chevota Guy · 08-31-2020, 04:28 PM

If you are looking for an M16-1.0 pitch metric nut, McMaster Carr has thin steel hex nuts. The 1.0mm pitch is not very common and I believe 2.0mm pitch is more typical for 16mm threads.

Tonyoldcart · 08-31-2020, 04:36 PM

Quote:

Originally Posted by Chevota Guy

If you are looking for an M16-1.0 pitch metric nut, McMaster Carr has thin steel hex nuts. The 1.0mm pitch is not very common and I believe 2.0mm pitch is more typical for 16mm threads.

Thanks I’m in a very rural area and trying to put this back together by Wednesday. Anything that can go wrong has so far so I’m not surprised this is an odd size. It’s for the flywheel on a G9. I’m about ready to just go buy a new one and give up. Lol

08-31-2020, 03:51 PM	#1
Tonyoldcart Not Yet Wild Join Date: Jul 2020 Posts: 22	16x1 nut Where do you buy them? Two dealers in my 1 1/2 hour drive range don’t have them, fastenal didn’t, auto parts didn’t. Any suggestions?
Tonyoldcart Not Yet Wild Join Date: Jul 2020 Posts: 22

08-31-2020, 04:28 PM	#2
Chevota Guy Gone Wild Join Date: Feb 2020 Location: Palm Springs, CA Posts: 218	Re: 16x1 nut If you are looking for an M16-1.0 pitch metric nut, McMaster Carr has thin steel hex nuts. The 1.0mm pitch is not very common and I believe 2.0mm pitch is more typical for 16mm threads.

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum