Help with Carburetor adjustment on G29

fryert15 · 03-30-2019, 09:59 AM

Ok thanks. Would you recommend a couple of full turns out?

Dave in VA · 03-30-2019, 01:23 PM

1 1/2 to 1 3/4 turns out, and go from there...

cgtech · 03-31-2019, 12:45 AM

If its lean, it probably needs to be taken all the way apart and cleaned, every bit of it. The pilot screw is for fine-tuning, not big adjustment. Unless other modifications have been done, in which case the screw likely won't get you what you need. if it is a crappy aftermarket carb, consider "fixing it" into the trash can.

fryert15 · 03-31-2019, 10:38 AM

I have cleaned the carb and as far as I know it’s Stock.
There has been no modifications done to the cart and I’ve changed the gaskets & checked for air leaks. So maybe it’s just a minor adjustment??

SandbaggerYDRA · 03-31-2019, 02:41 PM

Quote:

Originally Posted by fryert15

I have cleaned the carb and as far as I know it’s Stock.
There has been no modifications done to the cart and I’ve changed the gaskets & checked for air leaks. So maybe it’s just a minor adjustment??

Keep in mind that the adjustment screw is only for idle mixture. If you are running lean at speeds other than idle, and there are no obvious causes like loose fitting airbox, or other air leaks, and the carb is clean, I'd look into changing jets. Don Plowman sells performance kits which includes richer running jets.

BLACK DEATH · 04-01-2019, 07:06 PM

On Plowmans performance upgrade he adds a main jet for this.
Or you can maybe drill yours out

erics3000 · 04-22-2019, 05:04 PM

do you know how to adjust the float mine is running rich

03-30-2019, 09:59 AM	#11
fryert15 Not Yet Wild Join Date: May 2013 Posts: 21	Re: Help with Carburetor adjustment on G29 Ok thanks. Would you recommend a couple of full turns out?
fryert15 Not Yet Wild Join Date: May 2013 Posts: 21

03-30-2019, 01:23 PM	#12
Dave in VA maintaining a low profile Join Date: Oct 2009 Location: SW Virginia USA Posts: 6,316	Re: Help with Carburetor adjustment on G29 1 1/2 to 1 3/4 turns out, and go from there...

03-31-2019, 12:45 AM	#13
cgtech Over This Interview Is... Join Date: Jun 2012 Location: AZ Posts: 17,449	Re: Help with Carburetor adjustment on G29 If its lean, it probably needs to be taken all the way apart and cleaned, every bit of it. The pilot screw is for fine-tuning, not big adjustment. Unless other modifications have been done, in which case the screw likely won't get you what you need. if it is a crappy aftermarket carb, consider "fixing it" into the trash can.

03-31-2019, 10:38 AM	#14
fryert15 Not Yet Wild Join Date: May 2013 Posts: 21	Re: Help with Carburetor adjustment on G29 I have cleaned the carb and as far as I know it’s Stock. There has been no modifications done to the cart and I’ve changed the gaskets & checked for air leaks. So maybe it’s just a minor adjustment??
fryert15 Not Yet Wild Join Date: May 2013 Posts: 21

04-01-2019, 07:06 PM	#16
BLACK DEATH Gone Wild Join Date: Dec 2009 Location: Corpus Christi, TX Posts: 1,644	Re: Help with Carburetor adjustment on G29 On Plowmans performance upgrade he adds a main jet for this. Or you can maybe drill yours out

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

04-22-2019, 05:04 PM	#17
erics3000 Not Yet Wild Join Date: Apr 2019 Posts: 1	Re: Help with Carburetor adjustment on G29 do you know how to adjust the float mine is running rich
erics3000 Not Yet Wild Join Date: Apr 2019 Posts: 1

Similar Threads
Thread	Forum
carburetor adjustment	Gas Club Car
Need help with Carburetor adjustment	Gas EZGO
Carburetor Adjustment Question	Gas Club Car
1980 G1 Carburetor adjustment	Gas Yamaha
Carburetor Adjustment for Club Car DS	Gas Club Car