Need information on 05 ezgo workhorse

[Harleycruiser]

Thanks, new here.
I have a 05 workhorse, serial # under drivers seat is 2349496. I can't seem to find any info on this number doing the search on the ezgo website.
Is it a 350 engine? Is it a st sport or a txt? Is it a 06 like I was told. Thanks in advance more questions coming.
I'm putting bigger tires on, bed spray the body charcoal and will share some phots in the future.

[kgsc]

Should be a sticker on the frame rail above the motor with a date code. Look on the timing belt cover for a sticker to see what motor is in it.

[Harleycruiser]

Originally Posted by kgsc

Should be a sticker on the frame rail above the motor with a date code. Look on the timing belt cover for a sticker to see what motor is in it.

Thanks kgsc the number on the timing cover is ser#G05 018021
prod number EH352CE10106
under the seat is a sticker with the warnings and 74093-G01
but I think that is just the sticker number.
I would post a photo but I do not have enough days yet.

[kgsc]

Motor is the 350. Sticker on the rail would be about center of the rail. The sticker you mentioned is the warning sticker usually on the flip up panel. The one I am talking about is white about 3” long

[Harleycruiser]

Originally Posted by kgsc

Motor is the 350. Sticker on the rail would be about center of the rail. The sticker you mentioned is the warning sticker usually on the flip up panel. The one I am talking about is white about 3” long

Thanks, that is the only sticker on the frame rail over the motor. There is one where the plug in for the electric cart would be if electric. It says ser #2349496. But that does not come up on the ezgo site.

[kgsc]

That website has been messed up for a while. My 08 starts with 256 so yours being a 05 is not out of the question. You can call Ezgo and ask but it really doesn’t matter.

[StoveBolt]

Originally Posted by Harleycruiser

I would post a photo but I do not have enough days yet.

You can post a picture by clicking on the paper clip in the tool bar in the reply box and upload from your pc.

[kgsc]

But you need to click on Go Advanced first for it to show up.

[StoveBolt]

Originally Posted by kgsc

But you need to click on Go Advanced first for it to show up.

Didn't know that kg or know where Advanced is.

After I upload and then close the window I click on the down box
next to the paper clip and click on the attachment to show.

wtxt.JPG

[kgsc]

Sb, may depend on browser but I read threads I don’t see the clip. I two options, Post quick reply and Go Advanced. The Go Advanced gives me the toolbar with the clip.