motor instructions

Jimmie · 07-09-2010, 06:36 PM

lockman1 · 07-10-2010, 02:57 PM

Quote:

Originally Posted by Jimmie

That was not Jimmie, that was Papaw. I gave you the sequence as if looking at a clock. I will try and post a picture in a bit.

Jimmie

Maybe I should reread the WHOLE thread... huh???

Jimmie · 07-10-2010, 08:37 PM

Naw Man, Jimmie and Pawpa look the same. You do know you still have that bigger tire and wheel on the right front of your cart don't you.

Thanks for all you do

,
Jimmie

Jimmie · 07-10-2010, 09:54 PM

These pages are not from a Club Car Manual, they are from a Kwasaki Manual for an engine I own.

Jimmie

Disclaimer:
My comments are not endorsed by anybody or any of their partners. I
offer no warranty, expressed or implied for any unintentional or
accidental destruction of your system or what ever I may be commenting
on or about.

[ATTACH][ATTACH]Attachment 35187[/ATTACH][/ATTACH]

CLUBCARGREENMACHINE · 07-11-2010, 04:23 PM

i never took the valve cover off, i just took the head bolts out, and pulled the head and left the valve cover on. do i have to go through all of that, or can i just line the pushrods up, and put the head back on????

07-09-2010, 06:36 PM	#11
Jimmie Gone Wild Join Date: Oct 2009 Location: Lee County, Georgia Posts: 521	Re: motor instructions Attachment 35101 Jimmie

07-10-2010, 08:37 PM	#13
Jimmie Gone Wild Join Date: Oct 2009 Location: Lee County, Georgia Posts: 521	Re: motor instructions Naw Man, Jimmie and Pawpa look the same. You do know you still have that bigger tire and wheel on the right front of your cart don't you. Thanks for all you do, Jimmie

07-10-2010, 09:54 PM	#14
Jimmie Gone Wild Join Date: Oct 2009 Location: Lee County, Georgia Posts: 521	Re: motor instructions These pages are not from a Club Car Manual, they are from a Kwasaki Manual for an engine I own. Jimmie Disclaimer: My comments are not endorsed by anybody or any of their partners. I offer no warranty, expressed or implied for any unintentional or accidental destruction of your system or what ever I may be commenting on or about. [ATTACH][ATTACH]Attachment 35187[/ATTACH][/ATTACH]

07-11-2010, 04:23 PM	#15
CLUBCARGREENMACHINE Getting Wild Join Date: Dec 2009 Posts: 75	Re: motor instructions i never took the valve cover off, i just took the head bolts out, and pulled the head and left the valve cover on. do i have to go through all of that, or can i just line the pushrods up, and put the head back on????

Similar Threads
Thread	Forum
Driven Clutch instructions	Gas Club Car
Does anyone have the instructions for an MCOR conversion kit	Extreme DC!
Instructions needed on installing a new motor	Electric EZGO
92 steering box rebuild instructions	Gas EZGO
Ordered my lift kit from BU Need instructions	Lifted Golf Carts

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum