Seatbelt Install

[gpeak]

Got the belts on the back of the cart installed. For younger rear facing riders and wifey appeasement purposes. Thanks TerryH!

Wanted an install that would allow me to keep them out of the way when in flat bed mode and available when in rider mode, so I opted to stay away from the traditional bar/bracket installation. Through playing with a series of traditional stacked washers & fender washers I was able to come up with a setup that fits that purpose perfectly.

[mjjust]

Any closer pics of where you mounted them?

[as350pilot]

That looks very nice. I too would like to see some other angles of your install.

[gpeak]

Here are some additional shots. I took out the upper 3" bolts on the roof support and replaced them with a 3.5" to accomodate the sealtbelt mounted to the inside between the arm rest and seat back. I drilled through the deck making sure that that I spaced the holes 1.75" Left & right of center to give the latches enough room to articulate to the ready position, and fold away without hitting each other when they weren't in use.

Looking at driver's side back roof support


Brackets when not in use, with and without screw cover on one

Both rotated back out of the way

Latches rotated towards the back in buckle ready position, seat in folded down in place

Buckled

[as350pilot]

Thanks, great job on the install!