|
Electric golf carts Harley Davidson, Melex, Pargo, Taylor-Dunn and other Misc. Carts. |
|
Thread Tools | Display Modes |
04-01-2009, 07:19 PM | #1 |
Gone Wild
Join Date: Aug 2008
Location: Pine Mtn,Ga
Posts: 230
|
?? about converting 36 to 48!!
another question about converting as i dont want to hijack anybodys thread!! i have an older melex cart(resistor coil) and am thinking of going to 48 volts.. i am sure i am going to have to replace the solenoid on it, but what about the "wiper arm and board" .. will they have to be replaced, or will they be able to handle the juice!! i hear all the time about changing the controllers, but this doesnt have one, i dont guess!! help me please, need the speed!!!
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
04-01-2009, 07:36 PM | #2 |
nimda
Join Date: Jun 2007
Posts: 13,022
|
Re: ?? about converting 36 to 48!!
You won't have to touch the wiper assembly unless something is bad.
|
04-01-2009, 08:18 PM | #3 |
Gone Wild
Join Date: Aug 2008
Location: Pine Mtn,Ga
Posts: 230
|
Re: ?? about converting 36 to 48!!
sweet, all is good in that department, so what will i need, a 48v solenoid, wires?? what? thanks
also is there any way to tell what model i have or what year it is? will be tommorrow before i can get any numbers, but if you can tell me where to look, believe it is on pass side of center console! i have a fiberglass body on it, great condition Last edited by gatormeup; 04-01-2009 at 08:21 PM.. Reason: left ? out |
|
|
Similar Threads | ||||
Thread | Forum | |||
Converting 98, G16 from 36 to 48 volts | Electric Yamaha | |||
converting to 48v | Electric Club Car | |||
converting 36v resistor cart | Electric Club Car | |||
Converting PDS to Fleet | Electric EZGO | |||
Converting Precedent | Electric Club Car |