Pre 2001.5 vs 2003 txt frame

[TheWiltz]

I know the steering mounts are different. I could fix that. But what about everything else. I am thinking of putting a pre 2001.5 frame under a 2003 cart?

Any thoughts? Body mounts same? Suspension mounts? Ect...

Reason? My 2003 frame is rough!

Thanks

[TheWiltz]

Any thoughts before I go purchase the frame?

[scottyb]

no, just make sure the front axle is straight and the steering is good..... and the rear axle is good? Everything should interchange, as long as it is the same drive system..... if the drive system is different then you will need to swap the wiring harnesses as well.

[TheWiltz]

Originally Posted by scottyb

no, just make sure the front axle is straight and the steering is good..... and the rear axle is good? Everything should interchange, as long as it is the same drive system..... if the drive system is different then you will need to swap the wiring harnesses as well.

the only thing i will be using is a stripped dowm frame. i will swap everything over form the 2003 to the pre 2001.5 frame. They look very similar except for the stearing mount but ill just cut out the 03 and move it to the pre01.5, or fab a new one.

i will measure many points on the frame to see if they are all the same.

thanks.