|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
08-02-2014, 05:47 PM | #11 |
......................
Join Date: Apr 2009
Location: FT Lauderdale FL.
Posts: 16,416
|
Re: club car guts bar stool racer
You said that the cart is 48 volts? the switch in your pic says 36 volts on it
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
08-02-2014, 05:50 PM | #12 |
Gone Wild
Join Date: Dec 2009
Location: Aiken, SC
Posts: 13,188
|
Re: club car guts bar stool racer
This might help. http://www.gigglepin4x4.net/Download...WiringDiag.pdf
|
08-02-2014, 05:53 PM | #13 |
Not Yet Wild
Join Date: Jul 2014
Location: columbus ohio
Posts: 29
|
Re: club car guts bar stool racer
controller didn't have a tag i had took it out looked all over it but does have the same leads in the same place as a stock one from a 95 to 03 wiring diagram and was wired when i got it nothing was taken off.
|
08-02-2014, 05:58 PM | #14 |
Not Yet Wild
Join Date: Jul 2014
Location: columbus ohio
Posts: 29
|
Re: club car guts bar stool racer
Rib yes i just saw that myself when i ran out to get the old one the cart is 48 volt. did the guy that built it land the wire one battery back for that switch hell i don't know lol but the new switch that the guy gave me he bought is 48 volt and yes i tested voltage and wired the batterys per wiring diagram they read 48 volts thats y i am here lol
|
08-02-2014, 06:07 PM | #15 |
Not Yet Wild
Join Date: Jul 2014
Location: columbus ohio
Posts: 29
|
Re: club car guts bar stool racer
kgsc i love u lol ok now i see some mistakes on my part that is what i needed but that is for a winch motor now frist the three leads i have them backwards i am running pos, then 2 neg that is wrong ill rewire for this cart the M wire from the controller is in the F1 location let me look now see if i can figure it out thats ill post when i think i got it lol you guys are the best cant wait to get a ticket on it hahahahahahahahashashsah
|
08-02-2014, 06:15 PM | #16 |
......................
Join Date: Apr 2009
Location: FT Lauderdale FL.
Posts: 16,416
|
Re: club car guts bar stool racer
(F1 location?) if the motor is marked F1, that is not a series, it's a sepex
|
08-02-2014, 06:24 PM | #17 |
Not Yet Wild
Join Date: Jul 2014
Location: columbus ohio
Posts: 29
|
Re: club car guts bar stool racer
on that diagram where would you land the motor wires?
M from the controller was allready on switch,A1 allready comes from controller,S1,S2,A2,M, 4 leads 4 wires ummm we know where M goes how would you land the other 3 best gess before i gess lol |
08-02-2014, 06:25 PM | #18 |
Gone Wild
Join Date: Dec 2009
Location: Aiken, SC
Posts: 13,188
|
Re: club car guts bar stool racer
Easy now... It will be close to that diagram except the power feed will come from a controller. I mainly posted it for the solenoid wiring. Here is a club car series diagram. And I assumed series because of the contactor. May be sepex
|
08-02-2014, 06:29 PM | #19 |
Not Yet Wild
Join Date: Jul 2014
Location: columbus ohio
Posts: 29
|
Re: club car guts bar stool racer
Rib F1 refers to the diagram he posted for a winch with the switch i have i dont have a f on the motor lol a1,a2,s1,s2, club car 48 volt
|
08-02-2014, 06:33 PM | #20 |
......................
Join Date: Apr 2009
Location: FT Lauderdale FL.
Posts: 16,416
|
Re: club car guts bar stool racer
|
|
|
Similar Threads | ||||
Thread | Forum | |||
2005 pds with guts missing!!! | Electric EZGO | |||
Medalist pedal box guts | Electric EZGO | |||
starter doesnt seem to have the guts to turn over engine. | Gas Harley Davidson | |||
I gotta get one of these! A V8 powered bar stool cart! | Design Center |