|
|
|||||||
| Electric Club Car Electric DS, and Precedent golf cars |
  |
|
|
Thread Tools | Display Modes |
08-16-2014, 01:10 PM
|
#1 |
|
Gone Wild
Join Date: Oct 2008
Location: East Texas
Posts: 586
|
400 A Solenoid Broken Post
Had a problem with my 05 Precedent this morning. I came to a stop and te cart wouldn't go again. I checked things out and I have a broken post on the 400A Solenoid. It's one of the small posts on the side that is soldered underneath to the two wires from the solenoid itself. I am guessing that it is just pressed in. Has anyone else had one do this and were you able to fix it without replacing the whole unit?
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
08-16-2014, 03:23 PM
|
#2 |
|
Voltaholic
Join Date: Dec 2013
Location: Close to Navasota Texas
Posts: 934
|
Re: 400 A Solenoid Broken Post
If you are talking about the coil terminal, it should be easy to re solder the connection and epoxy it back in place.
I am curious why it broke. |
|
|
|
|
08-16-2014, 05:18 PM
|
#3 |
|
Gone Wild
Join Date: Oct 2008
Location: East Texas
Posts: 586
|
Re: 400 A Solenoid Broken Post
It broke on top where it is threaded with two wires connected. I'm not sure why it broke, but there is not enough threads left to hold a nut for the two wires.
|
|
|
|
|
08-18-2014, 05:37 AM
|
#4 |
|
Gone Wild
Join Date: Oct 2008
Location: East Texas
Posts: 586
|
Re: 400 A Solenoid Broken Post
Update: I ended up just soldering the wires to the coil post.
|
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| G9 Starter, Broken Post | Gas Yamaha | |||
| Broken battery post fix? | Electric EZGO | |||
| battery terminal post broken | Electric Club Car | |||
| Broken Battery Post | Electric EZGO | |||
| Broken battery post problem | Electric golf carts | |||
Linear Mode
