2000 creak on right side

motormouth27 · 04-25-2011, 06:55 AM

I have a 2000 cart and at low and high speeds theres a creak on the right side. I ve changed the brakes and there good. So I dont think that could be the problem. Anyone know what the cause of this is? Only thing I think can be left is the bearing? How hard is it to replace that? Is that the cause most likely?

scottyb · 04-25-2011, 07:29 AM

It could be the bearing. There is a snap ring retaining it in the tube and you may need a puller for the axle. Or the reversed drum trick...

motormouth27 · 04-27-2011, 07:36 AM

K thanks. I ll check that out. Is that hard to change?

scottyb · 04-27-2011, 08:40 AM

The bearing is pressed onto the axle. You can have it done at a local shop if your not set up for that type of thing once you get the axle off.

motormouth27 · 04-28-2011, 07:17 AM

So for someone like me with manchaincal ability is it complex? Or fairly easy? Cause I ve had the brake drum and all that out and off before. To replace them.

scottyb · 04-28-2011, 07:27 AM

NO not complicated. Pull the drum and remove the snap-ring and pull the axle with the bearing on it.

04-25-2011, 06:55 AM	#1
motormouth27 Gone Wild Join Date: Mar 2009 Location: Crofton MD Posts: 217	2000 creak on right side I have a 2000 cart and at low and high speeds theres a creak on the right side. I ve changed the brakes and there good. So I dont think that could be the problem. Anyone know what the cause of this is? Only thing I think can be left is the bearing? How hard is it to replace that? Is that the cause most likely?

04-25-2011, 07:29 AM	#2
scottyb Happy Carting Join Date: Dec 2007 Location: Southern California Posts: 73,419	Re: 2000 creak on right side It could be the bearing. There is a snap ring retaining it in the tube and you may need a puller for the axle. Or the reversed drum trick...

04-27-2011, 07:36 AM	#3
motormouth27 Gone Wild Join Date: Mar 2009 Location: Crofton MD Posts: 217	Re: 2000 creak on right side K thanks. I ll check that out. Is that hard to change?

04-27-2011, 08:40 AM	#4
scottyb Happy Carting Join Date: Dec 2007 Location: Southern California Posts: 73,419	Re: 2000 creak on right side The bearing is pressed onto the axle. You can have it done at a local shop if your not set up for that type of thing once you get the axle off.

04-28-2011, 07:17 AM	#5
motormouth27 Gone Wild Join Date: Mar 2009 Location: Crofton MD Posts: 217	Re: 2000 creak on right side So for someone like me with manchaincal ability is it complex? Or fairly easy? Cause I ve had the brake drum and all that out and off before. To replace them.

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

04-28-2011, 07:27 AM	#6
scottyb Happy Carting Join Date: Dec 2007 Location: Southern California Posts: 73,419	Re: 2000 creak on right side NO not complicated. Pull the drum and remove the snap-ring and pull the axle with the bearing on it.

Similar Threads
Thread	Forum
Passanger side Brake grabbing more than Driver side	Electric Club Car
Re: Golf cart .vs. side by side	Golf Carts and Parts
Golf cart .vs. side by side	Lifted Golf Carts
Top Creak	Electric Club Car