Installing stereo in ball holder? Clearance? 2008 PDS

[milltown]

Scooter, I was thinking about putting my speakers wehre you did but cart is gas and I was concerned about heat.

[Scooter B]

If you purchase the cover that surface mounts, that should work out but may require some trimming on the cover, they are all a little different. I'm going to try that route this week. (I'm not in a big hurry to cover since mine lives in the garage and I don't do much off roading, so there won't be a lot of washing with the hose)

I can't really speak on that, I don't know how hot the gassers get under the seat. Most of the marine speakers should hold up fairly well with high heat, but I don't know how much is too much.

[milltown]

Scooter, thanks for the help and suggestions.

[TGJR]

Originally Posted by essness

They are 6" coaxils. I had the front cowl off when I cut them in, I just used a jig saw with a wood blade. I also have an ST cowl which gives you a little more clearance to install them there.

Did the ST cowl bolt/rivet directly on?

[kab69440]

Originally Posted by milltown

Looks good Scooter, I hope when I do mine it looks as good. Does anybody know if you need to trim more or less when using one of those marine radio covers?

The cover has no effect on the size of the hole cut. You simply need to leave the face of the head unit raised about 3/8" from the surface of the dash. The cover simply screws to the dash over the top of the unit.

[milltown]

The cover has no effect on the size of the hole cut. You simply need to leave the face of the head unit raised about 3/8" from the surface of the dash. The cover simply screws to the dash over the top of the unit.

Thanks, I hope to be able to work on it this weekend.