|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
04-25-2010, 05:16 PM | #1 |
Not Yet Wild
Join Date: Apr 2010
Posts: 1
|
Ezgo upgrade
Newbie to this forum. I have an Ezgo s/n2290192 36v I believe this cart to be a 2005. This unit has a Curtis PMC controller p/n73326G06 s/n4365-P101710A
From what i gather this is a 300 Amp controller. The forward - reverse switch is on the dash, and the run tow switch is on the controller cover. I removed the cover and there is a 10 pin connector, a four pin going to the run reverse sw. and a five pin empty connector to the left of the 10 pin. Can I use this for the 4-way speed chip by Laracno? I am not sure if this is a PDF controller and don't want to plug anything in and smoke the unit. All reply's will be appreciated. |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Electric EZGO upgrade | Electric EZGO | |||
Electric EZGO upgrade | Lifted Golf Carts | |||
97 EZGO clutch upgrade | Gas EZGO | |||
94.5 ezgo upgrade | Electric EZGO | |||
05 ezgo txt upgrade | Electric EZGO |