|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
04-09-2011, 09:42 PM | #1 |
Not Yet Wild
Join Date: Mar 2011
Location: Phoenix Az
Posts: 22
|
G1 Governor bypassed now what.....
Okay so I bypassed the governor and it def. fixed my running issues. Now the cart will actually run, in reverse even (which I didn't get before the mod.). But now does the G1 have a rev limiter? It tops out and seems to plane out and run really smooth (not complaining). Also, once it starts its moving it really has no idle or low speed. I have the throttle cable adjusted so that the carb is completely closed at zero throttle and I wired the exhaust flap completely open. The mod didn't affect this problem either way.
Thanks, |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
04-10-2011, 05:47 AM | #2 |
Gone Wild
Join Date: Mar 2010
Location: Eminence, IN
Posts: 534
|
Re: G1 Governor bypassed now what.....
no rev limiter on the G1 with the gov bypassed. You are responcible for your own self at that point.
as far as the no low speed cruise deal the only thing i can think of is an adjustment issue...fiddle with it some and see what you can come up with. Others may have a better suggestion though |
04-10-2011, 09:56 AM | #3 |
Getting Wild
Join Date: Mar 2011
Location: Glendale Arizona
Posts: 94
|
Re: G1 Governor bypassed now what.....
One thing I noticed with mine is that once you get her rolling you might as well back off the throttle some. Once the belt makes it's travel on the sheives it doesn't really go any faster. Holding it wide open as opposed to 3/4 throttle really doesn't net you much speed. Haven't actually gps'd it, but WOT probably doesn't increase speed by more than a mph or two over 3/4 throttle. No sense in beating on the thing unnecessarily.
|
04-10-2011, 11:14 AM | #4 |
Not Yet Wild
Join Date: Mar 2011
Location: Phoenix Az
Posts: 22
|
Re: G1 Governor bypassed now what.....
Agreed, I am actually going to put a pedal stop on it so I dont have to worry about *cough*my wife *cough* holdin it to the wood and killin my poor cart. LOL
|
|
|
Similar Threads | ||||
Thread | Forum | |||
G1 governor help | Gas Yamaha | |||
governor help | Gas Yamaha | |||
governor | Electric EZGO | |||
88 ez go governor | Gas EZGO | |||
governor | Gas Club Car |