02-01-2013, 02:57 PM | #1 |
Gone Wild
Join Date: Jan 2013
Location: Down here Burning up in FL
Posts: 210
|
Honda 500cc in EZ-GO
I'm joining this madness and am going to try my hardest to keep this build from falling to the 2nd page
Cart: EZ-GO Motor: Honda 500cc 4 stroke Plans: independent suspension Front/Rear I have found this rear end i want to use http://www.protodie.com/-930-cv-Rear...iner_p_45.html Build a tube chassis underneath integrated into the stock frame and build the rear live axle kit into the rear. similar to the Rail below I appreciate any thoughts, help, ideas, etc. Thanks Brad Pictures: |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
02-02-2013, 12:35 AM | #2 |
rifter
Join Date: Nov 2007
Location: Orlando Florida
Posts: 4,055
|
Re: Honda 500cc in EZ-GO
I recognize this cart.
|
02-02-2013, 08:16 AM | #3 |
Gone Wild
Join Date: Dec 2009
Location: Ohio
Posts: 1,143
|
Re: Honda 500cc in EZ-GO
Check out a thread by rocdog in members rides he is doing a 550cc in his stretched ez go..
|
02-02-2013, 09:08 PM | #4 |
Gone Wild
Join Date: Jan 2013
Location: Down here Burning up in FL
Posts: 210
|
Re: Honda 500cc in EZ-GO
Rifter- Yea, I got it from a cool gentlemen that's got a lot of knowledge and skills about this madness ;) thanks for the sale and the tour of your shop and toys. It was a pleasure talking with you
Todd Dolfi- thanks for the lead. I'm likin the limo cart in your avatar Well change of plans, ended up getting a set of Sami axles and transfer case for the cart. Just what I wanted from the start. Hopefully ill get started on the straight frame soon and have some pics for y'all |
02-02-2013, 11:16 PM | #5 |
rifter
Join Date: Nov 2007
Location: Orlando Florida
Posts: 4,055
|
Re: Honda 500cc in EZ-GO
Good, the Sami conversion is definately cool, post pics!!
|
03-03-2013, 11:02 AM | #6 |
Getting Wild
Join Date: Mar 2012
Location: greensboro nc
Posts: 122
|
Re: Honda 500cc in EZ-GO
Lets see some pics, Hows it coming?
|
03-03-2013, 01:29 PM | #7 |
Gone Wild
Join Date: Jan 2013
Location: Down here Burning up in FL
Posts: 210
|
Re: Honda 500cc in EZ-GO
Well I bought the tubing for the frame just haven't had any time to work on it.
|
03-05-2013, 08:13 PM | #8 |
Gone Wild
Join Date: Jan 2013
Location: Down here Burning up in FL
Posts: 210
|
Re: Honda 500cc in EZ-GO
OK it's been awhile since an update so...... Here is somethin
2x2 and 1x2 for the straight frame 1.25 sch30 sub-frame |
03-05-2013, 08:19 PM | #9 |
Gone Wild
Join Date: Jan 2013
Location: Down here Burning up in FL
Posts: 210
|
Re: Honda 500cc in EZ-GO
Bent and Cut
|
03-05-2013, 08:21 PM | #10 |
Gone Wild
Join Date: Jan 2013
Location: Down here Burning up in FL
Posts: 210
|
Re: Honda 500cc in EZ-GO
Here is a Pic of The Cuts done with a hand Grinder
|
|
|
Similar Threads | ||||
Thread | Forum | |||
EzMan - 500cc 4x4! | Design Center | |||
help with G1 with 500cc vmax | Big Block Talk! | |||
500cc rotax 2 stroke | Gas Club Car | |||
87 Phazer snowmobile 500cc in a 97 G16A? | Big Block Talk! | |||
85 arctic cat 500cc | Gas golf carts |