|
|
|||||||
| Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
  |
|
|
Thread Tools | Display Modes |
07-23-2022, 07:40 PM
|
#1 |
|
Not Yet Wild
Join Date: Sep 2020
Location: Lexington NC
Posts: 42
|
0-5v Throttle Wiring Alltrax
Can someone help point me to the wiring diagram for a 0-5v throttle (3wire) with a SR48500? I have looked, but can not seem to find the correct schematic.
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
07-25-2022, 05:41 PM
|
#2 | |
|
Getting Wild
Join Date: Jun 2022
Location: Palm Beach County
Posts: 95
|
Re: 0-5v Throttle Wiring Alltrax
Quote:
|
|
|
|
|
|
07-26-2022, 05:39 PM
|
#3 |
|
Not Yet Wild
Join Date: Sep 2020
Location: Lexington NC
Posts: 42
|
Re: 0-5v Throttle Wiring Alltrax
Yes! It has been totally gutted and replaced with a Sr48500 from Carts Unlimited. I ordered a new electronic pedal, and realized it is actually 0-5v. I think I found a schematic, but just want to make sure I am correct. It looks like it needs to be fed a 5v signal from a down convertor.
|
|
|
|
|
07-26-2022, 05:58 PM
|
#4 |
|
Gone Wild
Join Date: May 2012
Location: Rio Verde, Az
Posts: 7,167
|
Re: 0-5v Throttle Wiring Alltrax
I would check - I would expect that the throttle gets 5V from the controller.
|
|
|
|
|
07-26-2022, 07:36 PM
|
#5 |
|
Not Yet Wild
Join Date: Sep 2020
Location: Lexington NC
Posts: 42
|
Re: 0-5v Throttle Wiring Alltrax
I am thinking it is like a PB6 and gets 5v from an alternate source, and then has a 0-5v signal wire that plugs into the controller.
|
|
|
|
|
07-27-2022, 05:33 PM
|
#6 | |
|
Getting Wild
Join Date: Jun 2022
Location: Palm Beach County
Posts: 95
|
Re: 0-5v Throttle Wiring Alltrax
Quote:
I realize that's apples to oranges because we're using two different brands. Curious what other models your controller is meant for. |
|
|
|
|
|
07-27-2022, 06:11 PM
|
#7 |
|
Getting Wild
Join Date: Jun 2022
Location: Palm Beach County
Posts: 95
|
Re: 0-5v Throttle Wiring Alltrax
|
|
|
|
|
07-28-2022, 04:21 PM
|
#8 |
|
Not Yet Wild
Join Date: Sep 2020
Location: Lexington NC
Posts: 42
|
Re: 0-5v Throttle Wiring Alltrax
So I am thinking that this is the schematic that I need to be using to properly setup the throttle wiring. Just want make sure I am looking at this correct, it is getting 5v power separate from the controller, and the signal wire is the only wire connected from the throttle to the controller.
|
|
|
|
|
|
||||||
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Alltrax throttle maps | Electric EZGO | |||
| Alltrax throttle settings | Electric Club Car | |||
| Alltrax throttle issues | Electric Club Car | |||
| Alltrax XCT throttle position | Electric EZGO | |||
| Alltrax Throttle | Electric Yamaha | |||
Linear Mode
