Tomberlin non lighted dash board fix

smooth72 · 02-22-2010, 09:26 PM

I thought I should make this a separate thread.

Ok, just took my dash switches out, 4 screws. At the bottom of the switch there is two prongs + - They are separate from the area were the carts controls plug in. I unplugged the switch and took a 9v battery and the LED in the switch lights right up. I can thank of no reason why they did not wire this in. Maybe the wanted to market as a upgrade. It appears to me that all you need to do is to get push on 12v connectors, chain the positive and negative together and find a switchable 12 v power supply.
When I wire mine I will give an update

portland · 02-22-2010, 09:31 PM

Do you know if this "fix" specific to 2010 models only?

Timdelta · 02-22-2010, 09:44 PM

I am very excited about this. The accessory outlet is a switched power source. Had to run down and check this out. This is a great way to have them on/off with key. Another easy way might be through the headlights, they are 12v too. Note----I am talking 2010 model.

smooth72 · 02-22-2010, 09:46 PM

Not sure, does your non 2010 switches have green or red plastic lens on the bottom of the switch? If so I am sure they have a light in them. No reason to have a colored lens unless they have light in them.

smooth72 · 02-22-2010, 09:48 PM

You will want to go to accessories, not head lights. That is part of the problem finding the switch to turn on the head lights.

smooth72 · 02-22-2010, 09:54 PM

Just thought of something my title should have read " Tomberlin non, lighted, LIGHTED dash board fix..

I am going to ask my dealership to ask Tomberlin why the did not wire this.

Timdelta · 02-22-2010, 10:00 PM

Quote:

Originally Posted by smooth72

You will want to go to accessories, not head lights. That is part of the problem finding the switch to turn on the head lights.

That is great point. The issue is groping for the headlight switch. I am going to do it though the accessory plug. I seem to be able to find the key hole. If this is still a burden then will do the simple push button switch to turn on off.

gornoman · 02-22-2010, 09:41 PM

Perhaps you can tie into the headlight circuit?

gornoman · 02-22-2010, 09:55 PM

They didn't, so you COULD!

Abnobbyillula · 04-01-2010, 02:19 AM

hello everybody

New here, hope im made welcome :)

02-22-2010, 09:26 PM	#1
smooth72 Getting Wild Join Date: Sep 2009 Location: Newcastle, Oklahoma Posts: 82	Tomberlin non lighted dash board fix I thought I should make this a separate thread. Ok, just took my dash switches out, 4 screws. At the bottom of the switch there is two prongs + - They are separate from the area were the carts controls plug in. I unplugged the switch and took a 9v battery and the LED in the switch lights right up. I can thank of no reason why they did not wire this in. Maybe the wanted to market as a upgrade. It appears to me that all you need to do is to get push on 12v connectors, chain the positive and negative together and find a switchable 12 v power supply. When I wire mine I will give an update

02-22-2010, 09:31 PM	#2
portland Not Yet Wild Join Date: Oct 2009 Location: NC Posts: 44	Re: Tomberlin non lighted dash board fix Do you know if this "fix" specific to 2010 models only?

02-22-2010, 09:44 PM	#3
Timdelta Getting Wild Join Date: Nov 2009 Location: Bradenton Fl area Posts: 115	Re: Tomberlin non lighted dash board fix I am very excited about this. The accessory outlet is a switched power source. Had to run down and check this out. This is a great way to have them on/off with key. Another easy way might be through the headlights, they are 12v too. Note----I am talking 2010 model.

02-22-2010, 09:46 PM	#4
smooth72 Getting Wild Join Date: Sep 2009 Location: Newcastle, Oklahoma Posts: 82	Re: Tomberlin non lighted dash board fix Not sure, does your non 2010 switches have green or red plastic lens on the bottom of the switch? If so I am sure they have a light in them. No reason to have a colored lens unless they have light in them.

02-22-2010, 09:48 PM	#5
smooth72 Getting Wild Join Date: Sep 2009 Location: Newcastle, Oklahoma Posts: 82	Re: Tomberlin non lighted dash board fix You will want to go to accessories, not head lights. That is part of the problem finding the switch to turn on the head lights.

02-22-2010, 09:54 PM	#6
smooth72 Getting Wild Join Date: Sep 2009 Location: Newcastle, Oklahoma Posts: 82	Re: Tomberlin non lighted dash board fix Just thought of something my title should have read " Tomberlin non, lighted, LIGHTED dash board fix.. I am going to ask my dealership to ask Tomberlin why the did not wire this.

02-22-2010, 09:41 PM	#8
gornoman Stay thirsty my friends! Join Date: Jan 2007 Location: Suburban Chicago Posts: 24,289	Re: Tomberlin non lighted dash board fix Perhaps you can tie into the headlight circuit?

02-22-2010, 09:55 PM	#9
gornoman Stay thirsty my friends! Join Date: Jan 2007 Location: Suburban Chicago Posts: 24,289	Re: Tomberlin non lighted dash board fix They didn't, so you COULD!

04-01-2010, 02:19 AM	#10
Abnobbyillula Not Yet Wild Join Date: Feb 2010 Posts: 1	New member, wanted to say hi hello everybody New here, hope im made welcome :)
Abnobbyillula Not Yet Wild Join Date: Feb 2010 Posts: 1

Similar Threads
Thread	Forum
My Lifted E4 Tomberlin	Tomberlin
2010 Tomberlin	Tomberlin
Lighted Rocker Switches	Design Center
Tomberlin	Tomberlin
Club Car Dash - Lockable Dash Insert Doors for Sale	Golf Carts and Parts