Replacing a Sevcon 6337T45303 Controller with an Altrax XCT Round 2

[swb713]

Originally Posted by bluwtr49

I'm hoping that wiring diagram is some what useful but, if I were to do it over, I would simply remove the entire wiring harness and rewire the cart as a club car (IQ I believe). Part of the issue is that Columbia using several splices that are buried in the harness and some of those need to be accessed.

Before I started this project I studied all the wiring diagrams for various other carts which are available on the Alltrax website. When you look at them it becomes obvious that all the hardware is pretty much the same and there are only a couple of dozen wires in the whole cart so a complete rewire isn't a significant issue and probably easier than patching in the circuits necessary.

One of the biggest challenges was to replace the accelerator module with a 0 - 5K pot. The Colombia supplied device mounted up by the hydraulic brake master cylinder and he had to fab a new mount under the car. I'll try to get underneath and snap a couple of pics.

Best of luck and if you need any other info just let me know.

I'll keep you posted.

I might end up doing a complete rewire myself as well.