08-07-2022, 05:46 PM | #1 |
Gone Wild
Join Date: Apr 2022
Posts: 321
|
Grease fittings on lifted carts?
Do the lifted Icon/AEV carts have any grease fittings on them? I don't see any on mine but there are a few threads about them. I'm wondering if it is another lifted/non-lifted cart difference.
Thanks! |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
08-13-2022, 04:57 PM | #2 |
Getting Wild
Join Date: Sep 2021
Location: Port st Lucie Florida
Posts: 80
|
Re: Grease fittings on lifted carts?
|
08-14-2022, 07:23 AM | #3 |
Gone Wild
Join Date: Apr 2022
Posts: 321
|
Re: Grease fittings on lifted carts?
Thank you. Now I can stop looking.
|
08-17-2022, 02:48 PM | #4 |
Getting Wild
Join Date: Nov 2020
Posts: 76
|
Re: Grease fittings on lifted carts?
I believe there will still be a grease fitting on the steering shaft at the joint. You might want to check it out.
|
08-17-2022, 05:18 PM | #5 |
Gone Wild
Join Date: Apr 2022
Posts: 321
|
Re: Grease fittings on lifted carts?
Thanks. I don't recall seeing one on there but I'll check that out again.
|
08-18-2022, 12:45 PM | #6 |
Gone Wild
Join Date: Apr 2022
Posts: 321
|
Re: Grease fittings on lifted carts?
I looked at the steering u-joints but I didn't see a grease fitting. However the u-joint does have grease on it.
Do you have a picture of this grease fitting? |
08-18-2022, 03:23 PM | #7 |
Getting Wild
Join Date: Nov 2020
Posts: 76
|
Re: Grease fittings on lifted carts?
|
08-18-2022, 03:28 PM | #8 |
Gone Wild
Join Date: Apr 2022
Posts: 321
|
Re: Grease fittings on lifted carts?
Thanks!
I take it that is the upper end? |
08-18-2022, 04:09 PM | #9 |
Gone Wild
Join Date: Apr 2022
Posts: 321
|
Re: Grease fittings on lifted carts?
My 2022 aev doesn't look like that and appears to be much longer. See the attached pics of the upper and lower ends.
|
08-19-2022, 08:07 AM | #10 |
Getting Wild
Join Date: Nov 2020
Posts: 76
|
Re: Grease fittings on lifted carts?
Yours does look different. Apparently there no need for grease anymore? Still, you were better off checking now than finding out later that a part failure could have been avoided.
|
Tags |
grease, lifted, zerk |
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Factory lifted Onward grease fittings | Gas Club Car | |||
Grease Fittings | Electric Yamaha | |||
Grease fittings on a G22 | Gas Yamaha | |||
grease fittings | Gas EZGO | |||
Grease fittings on G9 | Gas Yamaha |