|
Big Block Talk! Everything about swapping a big block engine into your cart! |
|
Thread Tools | Display Modes |
08-10-2022, 11:51 AM | #11 | |
Gone Wild
Join Date: Mar 2018
Location: South FL
Posts: 244
|
Re: Transaxle Governor
Quote:
I figure the 1190 is going to get me around 40-45 area, I am not after speed but lower rpms at cruising speed. Think of it like a 10 speed bike with the front & rear gears being different sizes. Happy hunting |
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
08-21-2022, 12:13 PM | #12 |
Getting Wild
Join Date: Nov 2014
Location: North Carolina
Posts: 145
|
Re: Transaxle Governor
So I installed the 6:1 gears from the Club Car DS. They installed fine and bearing from original gears pressed in without issue. The problem is the ring gear and pinion gear don’t mesh. There’s about 1/2” between the gears so I’m guessing these are simply wrong for the application. Any help with a gear set that will fit the Carryall 472 with diff lock would be appreciated.
|
08-21-2022, 01:32 PM | #13 |
Getting Wild
Join Date: Nov 2014
Location: North Carolina
Posts: 145
|
Re: Transaxle Governor
Here’s the axle tag for reference. Just looking to verify what gears will fit this.
|
08-22-2022, 03:36 AM | #14 | |
Gone Wild
Join Date: Aug 2010
Location: Central Florida
Posts: 1,506
|
Re: Transaxle Governor
Quote:
|
|
08-22-2022, 07:12 AM | #15 |
Getting Wild
Join Date: Nov 2014
Location: North Carolina
Posts: 145
|
Re: Transaxle Governor
I did reach out to David yesterday and eagerly awaiting a reply.
In the parts schematics for a Carryall 272/472 they list two transaxles, both locking, most of the parts are the same except for a few. The pinion on one has 13 teeth, and its paired with 72 tooth output gear. The pinion on the other has 12 teeth, paired with 64 tooth output gear. I have the 13/72 set in my cart and it's 15:1 forward and 20:1 reverse. So my questions is what ratio will the 12/64 combo provide if these are my only option and no other gears fit? Thank you all for the assist. |
11-15-2022, 08:43 AM | #16 |
Not Yet Wild
Join Date: Nov 2022
Location: Michigan
Posts: 72
|
Re: Transaxle Governor
That may be your final drive ratio but your gear ratio is ring/pinion or 72/13 which is 5.54 so 64/12 is 5.3
|
|
|
Similar Threads | ||||
Thread | Forum | |||
G2 Transaxle open, now is the time. Remove Governor or not? | Gas Yamaha | |||
G2 governor arm on transaxle | Gas Yamaha | |||
governor bypass or replace governor cable | Gas Yamaha | |||
Transaxle Swap/Yamaha Transaxle, Good Deal? | Lifted Golf Carts | |||
Duromax and Transaxle Governor | Clone Engine Swaps |