Troubles with an 06 CC Precedent

tonymoak1111 · 10-21-2010, 06:24 PM

Working on a cart and having a problem chasing down the problem. This is the newest cart for me to work on as of yet.

Heres the problem.......

When the accelerator is pressed the solenoid engages and then disengages there after. Have changed the solenoid and controller but the same thing is happening. Any suggestions will be greatly Appreciated........

Sorry, its a 48 volt cart.

OLD MEC · 10-22-2010, 07:51 AM

When solenoid engages does it imediately drop out as this is one sign of bad battery connections? Check and clean all battery connections and also check batterys for voltage and specific gravity and compare with STICKIES titled "STATE OF CHARGE READINGS" and post results. If it stays in for part of pedal movement I would checked the MCOR for resistance through range from pedal up to pedal down? You should have 5-0 OHMS reading, 5 as pedal just staring down to 0 pedal to floor.

TahoeDawgZ71 · 10-23-2010, 01:34 PM

I agree with OLD MEC... it sounds like the solenoid is dropping out because it's not getting enough voltage.

tonymoak1111 · 10-26-2010, 09:48 PM

It was the MCOR, Thanks so much for the help.

Does this sound wierd? it seems as if the internal Microswitch isnt working,,

TahoeDawgZ71 · 10-27-2010, 08:14 AM

Yes it's fully understandable.... It doesn't happen often, but I've seen it before... The micro switch was intermittent... That's why it would work sometimes, but sometimes it wouldn't... Glad you got it resolved.

OLD MEC · 10-27-2010, 09:20 AM

I have 5 MCOR new take off units that had same problem ( Micro inside wouldnt make contact ) when off you can hear slight click but wont work for some reason? I would like to find a bad MCOR that I could play with to maybe find a way to replace micro and seal back up? Anyone willing to donate one as I would be happy to pay shipping as I dont want to ruin the otherwise good units? Local shop says all take off MCOR units go back to factory, which I cant believe? Maybe they found a way to repair?

TahoeDawgZ71 · 10-27-2010, 04:49 PM

Quote:

Originally Posted by OLD MEC

I have 5 MCOR new take off units that had same problem ( Micro inside wouldnt make contact ) when off you can hear slight click but wont work for some reason? I would like to find a bad MCOR that I could play with to maybe find a way to replace micro and seal back up? Anyone willing to donate one as I would be happy to pay shipping as I dont want to ruin the otherwise good units? Local shop says all take off MCOR units go back to factory, which I cant believe? Maybe they found a way to repair?

Your local shop lied to you... unless they're referring to warranty returns. In that case, the only MCORs that would go back to the factory are the ones within two years old. I'd be happy to send you a few junk ones. Just PM me with your mailing information. I'm sure it won't take me long to find a few.

tonymoak1111 · 10-28-2010, 04:21 PM

Your welcome to the one I took off.

OLD MEC · 10-29-2010, 09:13 AM

Check Private Messages

10-21-2010, 06:24 PM	#1
tonymoak1111 Getting Wild Join Date: Oct 2007 Location: South Mississippi Posts: 106	Troubles with an 06 CC Precedent Working on a cart and having a problem chasing down the problem. This is the newest cart for me to work on as of yet. Heres the problem....... When the accelerator is pressed the solenoid engages and then disengages there after. Have changed the solenoid and controller but the same thing is happening. Any suggestions will be greatly Appreciated........ Sorry, its a 48 volt cart.

10-22-2010, 07:51 AM	#2
OLD MEC Gone Wild Join Date: Mar 2009 Location: South Texas Posts: 2,391	Re: Troubles with an 06 CC Precedent When solenoid engages does it imediately drop out as this is one sign of bad battery connections? Check and clean all battery connections and also check batterys for voltage and specific gravity and compare with STICKIES titled "STATE OF CHARGE READINGS" and post results. If it stays in for part of pedal movement I would checked the MCOR for resistance through range from pedal up to pedal down? You should have 5-0 OHMS reading, 5 as pedal just staring down to 0 pedal to floor.

10-23-2010, 01:34 PM	#3
TahoeDawgZ71 revolutiongolfcars.com Join Date: Mar 2010 Location: Golf Car Capital of The World... Augusta, Georgia Posts: 10,224	Re: Troubles with an 06 CC Precedent I agree with OLD MEC... it sounds like the solenoid is dropping out because it's not getting enough voltage.

10-26-2010, 09:48 PM	#4
tonymoak1111 Getting Wild Join Date: Oct 2007 Location: South Mississippi Posts: 106	Re: Troubles with an 06 CC Precedent It was the MCOR, Thanks so much for the help. Does this sound wierd? it seems as if the internal Microswitch isnt working,,

10-27-2010, 08:14 AM	#5
TahoeDawgZ71 revolutiongolfcars.com Join Date: Mar 2010 Location: Golf Car Capital of The World... Augusta, Georgia Posts: 10,224	Re: Troubles with an 06 CC Precedent Yes it's fully understandable.... It doesn't happen often, but I've seen it before... The micro switch was intermittent... That's why it would work sometimes, but sometimes it wouldn't... Glad you got it resolved.

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

10-27-2010, 09:20 AM	#6
OLD MEC Gone Wild Join Date: Mar 2009 Location: South Texas Posts: 2,391	Re: Troubles with an 06 CC Precedent I have 5 MCOR new take off units that had same problem ( Micro inside wouldnt make contact ) when off you can hear slight click but wont work for some reason? I would like to find a bad MCOR that I could play with to maybe find a way to replace micro and seal back up? Anyone willing to donate one as I would be happy to pay shipping as I dont want to ruin the otherwise good units? Local shop says all take off MCOR units go back to factory, which I cant believe? Maybe they found a way to repair?

10-28-2010, 04:21 PM	#8
tonymoak1111 Getting Wild Join Date: Oct 2007 Location: South Mississippi Posts: 106	Re: Troubles with an 06 CC Precedent Your welcome to the one I took off.

10-29-2010, 09:13 AM	#9
OLD MEC Gone Wild Join Date: Mar 2009 Location: South Texas Posts: 2,391	Re: Troubles with an 06 CC Precedent Check Private Messages

Similar Threads
Thread	Forum
400 cc troubles	Gas EZGO
48v-12V converter troubles	Electric Club Car
gas club car precedent light troubles	Gas Club Car
G19 Troubles	Electric Yamaha