IQ with Alltax 500 amp controller?

seadoo10 · 11-16-2010, 08:14 PM

Quote:

Originally Posted by cheapjeep2

What I have learned though over the years with DCX controllers is that they HAVE to run the right field map for the motor you are running them with. If not you WILL damage the controller. So if you get a DCX and you are running a stock motor, but later you change to something else, you have to change the motor profile (field map) or else it will blow-up, maybe not right away, but it will die. This isn't explicitly clear in any of the documentation

What field map would you suggest for a Plum Quick purple motor?

cheapjeep2 · 11-16-2010, 08:30 PM

Quote:

Originally Posted by seadoo10

What field map would you suggest for a Plum Quick purple motor?

PlumQuick does not change the fields on the purple motors, so if this is a stock IQ motor that has been redone by Plumquick then the correct Field Mapping is #6. If it is a Regen 2 cart i.e. PDPlus cart, then the field mapping is #8.

This is in the literature at AllTrax.

http://www.alltraxinc.com/files/Doc1...ors-Manual.pdf

If you've switched to a different motor then the company that provided you the controller should be able to get you the new hex map for your controller to match the new motor, but you will also need the controller pro software from Alltrax to program the controller.

krc15 · 11-16-2010, 09:37 PM

I have a DCX600 w/ The plumquick Executioner motor. The cart runs great, i haven't done anything else other than 2 gauge wires and a 400amp solenoid. The cart runs 35-36 level and 45mph down a slight hill. No issues w overheating either. Hope this helps your decision, u just cant go wrong w Alltrax and plumquick.

Kevin

easydoesit · 11-16-2010, 10:48 PM

what cart do you have this set up on?

thx

krc15 · 11-17-2010, 11:11 AM

AHHH sorry i knew i left something out. LOL

Its a 2004 Club Car IQ - Shunt wound

Kevin

easydoesit · 11-17-2010, 07:50 PM

Is it a Precedent or DS?

CartTrader · 11-17-2010, 10:17 PM

Quote:

Originally Posted by krc15

I have a DCX600 w/ The plumquick Executioner motor. The cart runs great, i haven't done anything else other than 2 gauge wires and a 400amp solenoid. The cart runs 35-36 level and 45mph down a slight hill. No issues w overheating either. Hope this helps your decision, u just cant go wrong w Alltrax and plumquick.

Kevin

What size tires and what rear gear ratio?

CartTrader

11-16-2010, 09:37 PM	#13
krc15 Not Yet Wild Join Date: Aug 2010 Posts: 45	Re: IQ with Alltax 500 amp controller? I have a DCX600 w/ The plumquick Executioner motor. The cart runs great, i haven't done anything else other than 2 gauge wires and a 400amp solenoid. The cart runs 35-36 level and 45mph down a slight hill. No issues w overheating either. Hope this helps your decision, u just cant go wrong w Alltrax and plumquick. Kevin
krc15 Not Yet Wild Join Date: Aug 2010 Posts: 45

11-16-2010, 10:48 PM	#14
easydoesit Gone Wild Join Date: Sep 2010 Location: Mia, Fl. Posts: 424	Re: IQ with Alltax 500 amp controller? what cart do you have this set up on? thx

11-17-2010, 11:11 AM	#15
krc15 Not Yet Wild Join Date: Aug 2010 Posts: 45	Re: IQ with Alltax 500 amp controller? AHHH sorry i knew i left something out. LOL Its a 2004 Club Car IQ - Shunt wound Kevin
krc15 Not Yet Wild Join Date: Aug 2010 Posts: 45

11-17-2010, 07:50 PM	#16
easydoesit Gone Wild Join Date: Sep 2010 Location: Mia, Fl. Posts: 424	Re: IQ with Alltax 500 amp controller? Is it a Precedent or DS?

Similar Threads
Thread	Forum
a DC motor controller ( electronic speed controller)	Golf Carts and Parts
did I fry the controller	Electric Club Car
Bad Controller ?	Electric EZGO
Did lift kit cause controller to die? What are controller options? 95 EZGO 25864G05	Electric EZGO
850 Amp controller	Golf Carts and Parts

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum