|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
02-04-2011, 11:03 PM | #11 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: No Forward After Upgrade
Can you post a diagram of how your cart is wired?
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
02-04-2011, 11:05 PM | #12 |
nimda
Join Date: Jun 2007
Posts: 13,022
|
Re: No Forward After Upgrade
What diagram did you use?
|
02-04-2011, 11:10 PM | #13 |
Not Yet Wild
Join Date: Sep 2010
Location: Natchez, MS
Posts: 54
|
Re: No Forward After Upgrade
Roady I tried to but being ignorant in the matter i tried but i did not do it right. And i used a diagram that you (ScottyB) gave me. I can put it up if i need to.
|
02-04-2011, 11:18 PM | #14 |
Not Yet Wild
Join Date: Sep 2010
Location: Natchez, MS
Posts: 54
|
Re: No Forward After Upgrade
On the pot box reading it read to 2.93.. i know 5 would is what it can go to but what if it reads over 5? I am going to fix that problem next but first I must run.
|
02-04-2011, 11:29 PM | #15 |
nimda
Join Date: Jun 2007
Posts: 13,022
|
Re: No Forward After Upgrade
A little over 5 is alright, even 6 should be fine. Your going to have to check your wiring and get familiar with that meter. Post up a link to that diagram.
Is that read 2.93 in forward? |
02-04-2011, 11:32 PM | #16 |
Not Yet Wild
Join Date: Sep 2010
Location: Natchez, MS
Posts: 54
|
Re: No Forward After Upgrade
This is the diagram i used. Hope its readable because I had to take the picture with my phone..
|
02-04-2011, 11:36 PM | #17 |
Not Yet Wild
Join Date: Sep 2010
Location: Natchez, MS
Posts: 54
|
Re: No Forward After Upgrade
I did have it in forward whenever i tested it. But could my problem have to do with not using the micro on the F/R. i have the wire running from the key switch directly to the micro on the pb-6..
|
02-04-2011, 11:38 PM | #18 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: No Forward After Upgrade
LOL Recognize that diagram Roady? That diagram works.
|
02-04-2011, 11:39 PM | #19 |
nimda
Join Date: Jun 2007
Posts: 13,022
|
Re: No Forward After Upgrade
keyswitch to pot then pot to solenoid/controller will work. You just bypassed the F/R safety feature is all.
|
02-04-2011, 11:39 PM | #20 |
nimda
Join Date: Jun 2007
Posts: 13,022
|
Re: No Forward After Upgrade
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Alarm sounding in forward. No movement in forward or reverse | Electric Club Car | |||
G9A Will Not Go Forward | Gas Yamaha | |||
Forward Reverse switch melted on forward...have question about replacement part | Electric Club Car | |||
No forward | Electric EZGO |