I need wiring help... headlights etc

mopar92 · 08-13-2009, 10:56 PM

I have a 89 EZ Marathon. I bought a new front cowl, headlights, markers.... Its all installed, just waiting the wiring. I went to tractor supply and bought a 3 way switch, on, markers, headlights and markers.... I am fairly ok with dc electricity, but for some reason, I dont get it... I have fried the wires on my mock up switch and old generic headlight.... no diagram came with the switch,can somebody tell me or draw me a diagram, I'd be willing to paypal or pay you for it!!!!!!!!! Nothing came with the Tractor Supply info....

Thanks, Keith

Id like to have, Off, then markers, then markers and headlights... in switch order.

mikesmotortoys · 08-13-2009, 10:57 PM

Never seen a switch like that!

mopar92 · 08-13-2009, 11:01 PM

I don't really want an on off switch, would be super cool to do markers and headlights.... anybody?

pizzamaker · 08-13-2009, 11:06 PM

the only way i see it is the power to the fuse, grounds on the right and markers on one left and headlights on the other.

mopar92 · 08-13-2009, 11:08 PM

too many wobbly pops after a long day of work is hard to do wiring, but I couldnt figure it out.... thanks.

mopar92 · 08-13-2009, 11:10 PM

could one of you do a simple drawing, schematic? Thanks a TON

pizzamaker · 08-13-2009, 11:13 PM

Quote:

Originally Posted by mopar92

could one of you do a simple drawing, schematic? Thanks a TON

i'm guessin' on whats right, i'll draw it tomorrow

mopar92 · 08-13-2009, 11:14 PM

Should that shared terminal on the side (solid piece, connected) be on positive or negative?

pizzamaker · 08-13-2009, 11:18 PM

Quote:

Originally Posted by mopar92

Should that shared terminal on the side (solid piece, connected) be on positive or negative?

my thinking is the solid terminal on the right in the picture is the ground, one screw for the ground from the lights and the other screw is grounded to the frame.

popatop · 08-14-2009, 06:27 AM

Hi mopar92 The way I wired mine and my brother in laws was ground the headlights and running lights to a good ground on the body, Then run your hot wire to the head light switch, use a test light and pull the switch out to the first notch and check to see which prong is hot and hook running lights their, then pull switch out all the way and check prong on switch for power and hook headlights their, Then you should have running lights at the first position and running lights and headlights pulled out all the way. Hope this helps good luck

08-13-2009, 10:57 PM	#2
mikesmotortoys Gone Wild Join Date: Mar 2008 Location: Rockwall, Texas (Dallas / Ft. Worth) Posts: 7,077	Re: I need wiring help... headlights etc Never seen a switch like that!
	www.MIKESMOTORTOYS.com www.EZGOPARTSONLINE.com Factory EZGO - Bad Boy Buggy - Dixie Chopper Mowers

08-13-2009, 11:01 PM	#3
mopar92 Gone Wild Join Date: Apr 2008 Posts: 371	Re: I need wiring help... headlights etc I don't really want an on off switch, would be super cool to do markers and headlights.... anybody?
mopar92 Gone Wild Join Date: Apr 2008 Posts: 371

08-13-2009, 11:06 PM	#4
pizzamaker ****tard supreme Join Date: Jun 2008 Location: waldo,wisconsin Posts: 5,401	Re: I need wiring help... headlights etc the only way i see it is the power to the fuse, grounds on the right and markers on one left and headlights on the other.

08-13-2009, 11:08 PM	#5
mopar92 Gone Wild Join Date: Apr 2008 Posts: 371	Re: I need wiring help... headlights etc too many wobbly pops after a long day of work is hard to do wiring, but I couldnt figure it out.... thanks.
mopar92 Gone Wild Join Date: Apr 2008 Posts: 371

08-13-2009, 11:10 PM	#6
mopar92 Gone Wild Join Date: Apr 2008 Posts: 371	Re: I need wiring help... headlights etc could one of you do a simple drawing, schematic? Thanks a TON
mopar92 Gone Wild Join Date: Apr 2008 Posts: 371

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

08-13-2009, 11:14 PM	#8
mopar92 Gone Wild Join Date: Apr 2008 Posts: 371	Re: I need wiring help... headlights etc Should that shared terminal on the side (solid piece, connected) be on positive or negative?
mopar92 Gone Wild Join Date: Apr 2008 Posts: 371

08-14-2009, 06:27 AM	#10
popatop Gone Wild Join Date: Jun 2008 Location: Raytown, Missouri Posts: 894	Re: I need wiring help... headlights etc Hi mopar92 The way I wired mine and my brother in laws was ground the headlights and running lights to a good ground on the body, Then run your hot wire to the head light switch, use a test light and pull the switch out to the first notch and check to see which prong is hot and hook running lights their, then pull switch out all the way and check prong on switch for power and hook headlights their, Then you should have running lights at the first position and running lights and headlights pulled out all the way. Hope this helps good luck

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Forum
headlights dim in and out	Gas Yamaha
my cc with ez-go headlights	Design Center
Dim Headlights	Electric EZGO
Wiring 12V Headlights on 36V cart	Electric EZGO
Headlights	Gas Yamaha