lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Gas Yamaha
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles

Post New Thread  Reply
Thread Tools Display Modes
Old 12-12-2012, 07:57 PM   #1
Gone Wild
Join Date: Jul 2011
Posts: 389
Default G1 engine hone

I need to buy a honer for my cylinder, i bought one from autozone but it wasnt the right stones returned it so i found one with 2 inch stones on it and it says for size 32-89 mm, and the stones are 2 inch and 51mm, im not good at mm sizes should this size work ok and 2 inch stones? Thanks.
makobuggie is offline   Reply With Quote
Alt Today

Golf car forum Sponsored Links

This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
Old 12-13-2012, 10:42 AM   #2
Gone Wild
DOOmsman's Avatar
Join Date: Jul 2008
Location: Reddick IL
Posts: 10,985
Default Re: G1 engine hone

Should be good to go, just watch the ends at the ports as you hone.
DOOmsman is offline   Reply With Quote
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Gas Yamaha

Thread Tools
Display Modes

Similar Threads
Thread Forum
1984 ezgo marathon engine replacement to atv engine Gas EZGO
Club Car engine install/clone engine help Gas Club Car
bore & hone, new piston/rings..HELP!!!!! Gas Club Car
Hone for sale or rent??? Gas Yamaha
Amsoil Synthetic engine oil or Royal Purple engine oil Big Block Talk!

All times are GMT -5. The time now is 08:40 AM.

Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2021, vBulletin Solutions, Inc.
This Website and forum is the property of No material may be taken or duplicated in part or full without prior written consent of the owners of 2006-2017 All rights reserved.